New Window Installation Cost - Free Measure, Exact Written Quote

How Much Does New Window Installation Cost in Dallas?

New window installation in Dallas typically costs $450 to $1,300 per window including materials and labor, with most homeowners spending $6,500 to $13,500 for a full-home replacement of 10 to 15 windows. Entry-level vinyl windows in standard sizes run $300 to $550 installed, while premium impact-rated or custom wood windows from brands like PGT or CGI can reach $1,800 to $3,500 per unit. The exact figure depends on window style, frame material, glass package, and whether the existing frame needs repair.

At Hale Windows Dallas, we put the price in writing before anyone picks up a tool. That means the number we quote is the number you pay – no surprises on the invoice. Call (361) 203-9040 for a free estimate, and you’ll have a written price in your hands the same day.

Key Takeaways

• Average cost per window in Dallas: $450 to $1,300 installed
• Full-home replacement (10-15 windows): $6,500 to $13,500
• Budget vinyl windows start around $300 to $550 each
• Premium impact-rated windows (PGT, CGI): $1,800 to $3,500 each
• Labor typically runs $150 to $300 per window in the Dallas market
• Hale Windows Dallas offers free written estimates: (361) 203-9040

New Window Installation Cost Breakdown (2026)

Here’s what Dallas homeowners can expect to pay in 2026, broken down by window type and material. These ranges reflect installed pricing that includes removal of the old window, disposal, labor, and basic interior trim work in the Dallas-Fort Worth metro.

The biggest cost driver in Dallas is the glass package. Single-pane windows are rare now and mostly found in pre-1980 homes in neighborhoods like Oak Cliff or East Dallas. Double-pane with low-E coating (a thin metallic layer that blocks heat while letting light through) is the standard recommendation for Dallas summers, where July highs average 96°F. Triple-pane and impact-rated glass add 40% to 80% to the base price but cut heat transfer significantly – a real consideration given Dallas runs the air conditioner from May through October.

Frame condition matters more in Dallas than in drier markets. We regularly see homes in Preston Hollow and Lake Highlands where the original 1970s aluminum frames have corroded from years of humidity and hard water exposure from foundation sprinkler systems that spray the exterior walls. If the rough opening is rotted or out of square, expect to add $75 to $250 per opening for repair before the new window goes in.

What Affects New Window Installation Pricing in Dallas

• Window style and operation. Fixed picture windows cost the least to install because there are no moving parts. Casement and awning windows run 15% to 25% more than double-hungs of the same size. Bay and bow windows are the most expensive, often $2,500 to $6,000 per opening because they require roof and support framing.
• Glass package and energy ratings. Dallas sits on the edge of two climate zones, so the Energy Star requirements for North Texas call for a solar heat gain coefficient of 0.25 or lower. Low-E glass with argon gas fill runs $40 to $80 more per window than standard double-pane. Impact-rated glass, which is becoming more popular in Dallas after the 2019 tornado that hit North Dallas and Preston Hollow, adds $500 to $1,200 per window.
• Home age and existing frame condition. Homes built before 1985 in neighborhoods like Lakewood or the M Streets often have non-standard rough openings. Retrofit installation into existing frames is cheaper, but full-frame replacement – where we pull the entire window down to the studs – adds $100 to $300 per window and is sometimes the only option when moisture has damaged the framing.
• Permit requirements and code compliance. The City of Dallas requires a permit for window replacement when the opening size changes or structural work is involved. Permit fees run $50 to $200 depending on the scope. Like-for-like replacements typically don’t need a permit, but egress requirements in bedrooms mean we sometimes have to enlarge openings, which adds cost.
• Second-story access and site conditions. Second-floor windows in two-story homes throughout Garland, Richardson, and North Dallas require ladder or scaffold work, adding $25 to $50 per window in labor. Hard-to-reach windows, overgrown landscaping, or homes on slab foundations where we can’t get a lift near the wall all push labor higher.
• Product line and manufacturer. Hale installs and services eight professional-grade window brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Builder-grade vinyl from a home center runs lower, but the frame tolerances, seal quality, and hardware durability aren’t in the same class. A PGT or CGI impact window isn’t just a window – it’s an engineered system built to stay in the opening during 130 mph wind loads.

How to Save on New Window Installation

Saving money on window installation in Dallas doesn’t mean buying the cheapest window on the shelf. It means spending once and avoiding a second bill later. Here’s what actually moves the number on your quote.

• Replace windows in phases, but plan for it upfront. If budget is the constraint, split the project: street-facing windows first, bedrooms second, bathrooms and utility rooms last. Tell the installer before the first quote so the labor is booked efficiently rather than paying trip charges each time.
• Stick with standard sizes when possible. Custom-sized windows cost 20% to 50% more than stock dimensions. If the rough opening allows a standard size without major framing changes, that’s real savings.
• Choose vinyl over wood unless the architecture demands it. Modern vinyl from brands like ECO Window Systems and Mr-Glass has come a long way. You get good thermal performance at roughly half the cost of wood. For Dallas heat and humidity, vinyl also avoids the rot and repainting cycle that wood windows face.
• Ask about off-season scheduling. Window companies in Dallas are busiest in spring and fall when the weather is mild. Booking a December or January installation can sometimes earn a small discount because crews are less booked. The tradeoff is working around colder days, but Dallas winters are short.
• Bundle windows with a door replacement. If you’re replacing a front door along with windows – especially a Therma-Tru entry door – doing it in one job saves on trip fees, disposal, and sometimes material delivery. We quote both together so you see the line-item difference.

The most direct way to know your real cost: get a free written estimate from Hale Windows Dallas. Call (361) 203-9040 and we’ll come out, measure, and hand you a written price before any work begins. You’ll also know exactly who is coming to your home before the truck pulls up – every Hale technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo. That’s the Threshold Standard, and it’s how we’ve operated since 2009.

What’s Included in a Hale Windows Dallas Quote

When you get a written price from Hale Windows Dallas, here’s exactly what’s in it. We don’t leave line items vague.

• Product cost by brand and model. We quote specific windows from our eight product lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – never an unnamed “premium window” that could be anything.
• Labor including removal and disposal. We haul away the old windows and leave the work area clean. Disposal fees for old aluminum and single-pane glass are already in the price.
• Interior trim work. Basic stop and stool replacement is included. If we find rotted framing or need to rebuild a sill, that’s quoted as a separate line item before we proceed, never added as a surprise.
• Caulking, insulation, and weather sealing. Every window gets foam insulation around the frame and exterior-grade caulk to handle Dallas rain and wind.
• The 365-Day Done Right Promise. Every installation carries this guarantee in writing. If the work isn’t right, we make it right – no argument needed, no deductible, no runaround.

Dallas-Specific Considerations for Window Installation

Dallas isn’t like other markets. The heat, the hail, the occasional tornado, and the clay soil all affect what kind of windows make sense and what installation looks like.

Hail resistance matters here. Dallas County sees hailstorms almost every year, some severe enough to total roofs and crack window glass. Standard double-pane windows hold up to most hail, but if you live in an area that’s been hit repeatedly – parts of Richardson, Garland, and Mesquite have seen repeated hail events – impact-rated glass from PGT or CGI is worth considering. These windows carry a Miami-Dade County approval rating, the strictest wind and impact standard in the country.

Clay soil means foundation movement. The expansive clay soils in Dallas, particularly in East Dallas, Casa View, and parts of Irving, cause homes to shift. Over time, window openings go slightly out of square. A good installer checks the square of every opening before ordering windows and adjusts for it. A cheap installer orders the window to the rough size and forces it in, which leads to binding sashes and failed seals within a few years.

Heat gain is the enemy, not cold. In northern markets, window ratings prioritize the U-factor – how well the window holds heat in. In Dallas, the solar heat gain coefficient (SHGC) matters more. You want glass that blocks radiant heat from the sun while still letting daylight through. Low-E coatings do this. For west-facing windows – the ones that get hammered by afternoon sun – a lower SHGC glass package is worth the upgrade. We’ve measured 20°F+ differences between low-E and standard glass surfaces on west walls in August.

How Much Does It Cost to Replace 10 Windows in Dallas?

Replacing 10 windows in Dallas typically costs $4,500 to $13,000 depending on window style, glass package, and frame condition. A 10-window job in standard vinyl double-hungs will land around $5,000 to $6,700. The same job in fiberglass or wood runs $7,500 to $14,800. If you’re going impact-rated, budget $10,000 to $21,000 for 10 openings.

A 10-window job usually takes one to two days with a crew of two or three installers. We book Dallas-area jobs like this regularly, and the written quote you get from Hale includes the per-window price so you can see exactly where the money goes.

Is It Cheaper to Repair or Replace Windows in Dallas?

For windows under 15 years old, repair usually makes more sense. Replacing a broken glass pane in Dallas runs $120 to $350 installed. Replacing a failed insulated glass unit (where condensation forms between the panes) runs $175 to $500. Replacing the entire window runs $450 to $1,300. If the window frame is sound and the hardware works, repair wins on price.

But if you’re dealing with windows older than 20 years, single-pane glass, or frames that have rot or corrosion, replacement is the better long-term call. Dallas homes built in the 1960s and 70s often still have original aluminum single-pane windows, and at that age, repairs become a game of whack-a-mole. One Hale window repair carries a written guarantee – if it fails, the second visit is free – but at some point, replacement is the cheaper total cost of ownership.

FAQs – New Window Installation Cost

How much does new window installation cost in Dallas?

New window installation in Dallas averages $450 to $1,300 per window installed, with full-home projects of 10 to 15 windows running $6,500 to $13,500 total. Your specific price depends on window style, frame material, glass package, and whether the existing frame needs repair. Call (361) 203-9040 for a free written estimate – we’ll hand you a price before any work begins.

What is the cheapest window to install?

Vinyl single-hung windows are the cheapest to install in Dallas, at $300 to $570 per window installed. Builder-grade aluminum single-hungs can run slightly lower, around $310 to $600, but aluminum conducts heat and struggles with Dallas summers. For budget-conscious homeowners, a standard-size vinyl single-hung with double-pane glass and low-E coating is the best value, and you can expect to pay around $400 to $500 per window installed.

Can you install windows the same day in Dallas?

For standard-size replacement windows where the existing frames are sound, yes – we can often complete a 5 to 10 window installation in a single day. Custom-order windows from brands like PGT, CGI, ES Windows, or ViewLux typically require 2 to 6 weeks for manufacturing after the quote is approved. Call (361) 203-9040 and we’ll tell you the realistic timeline for your specific windows during the estimate.

How much do PGT impact windows cost in Dallas?

PGT impact-rated windows run $1,080 to $2,150 per window installed in the Dallas market, depending on size and glass package. Larger openings, custom shapes, and higher design pressure ratings can push individual windows to $2,500 or more. Given Dallas’s hail exposure and occasional severe wind events, many homeowners in storm-prone neighborhoods find the investment worthwhile.

Does replacing windows add value to a home in Dallas?

Replacing windows recovers roughly 70% to 80% of project cost in home resale value, according to national remodeling data, and Dallas buyers notice energy-efficient windows because summer air conditioning bills are a real concern here. Beyond resale, new low-E windows cut cooling costs by 15% to 30% in North Texas homes, which on a $300 summer electric bill means savings of $45 to $90 per month during peak season.

Do I need a permit to replace windows in Dallas?

Like-for-like window replacements in Dallas typically don’t require a permit, but the City of Dallas does require permits when you’re changing the opening size or doing structural work to the rough framing. Adding egress windows to bedrooms or converting a window to a door both trigger permit requirements. Hale Windows Dallas handles permit applications for any job that requires one, and the fee – usually $50 to $200 – is listed on your written quote.

Get a Free Written Estimate From Hale Windows Dallas

You don’t have to guess what new windows will cost in Dallas. You can know, in writing, before anyone picks up a tool. Call (361) 203-9040 and we’ll schedule a free estimate at your home. A live person answers every call, 24 hours a day, 7 days a week. Before the visit, you’ll receive the name and photo of your technician – Spencer Odell leads our team, and every tech who comes to your door is background-checked, identity-verified, uniformed, and photo-badged under the Threshold Standard.

We install and service windows from home professionals trust: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Our New Window Installation in Dallas service covers the full metro, from Oak Cliff and Lake Highlands to Richardson, Garland, and Mesquite. And every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right, no argument needed.

Call (361) 203-9040 today for your free, no-obligation written estimate. Know the price before the work starts. That’s how we’ve done it since 2009, and that’s how we’ll do it for you.

Written by Spencer Odell, Owner at Hale Windows Dallas, serving Dallas and the surrounding metro since 2009.

Pricing reflects the Dallas market as of 2026. Hale Windows Dallas offers free estimates – call (361) 203-9040.