New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Replacement: The Dallas Owner’s Guide
PGT window replacement in Dallas typically runs $450 – $1,100 per window installed, depending on size, glass package, and frame condition. We stock PGT-compatible insulated glass units (IGUs) and hardware on our trucks, so most replacements happen in a single visit. Homeowners usually discover the failure the same way: fog between the panes, a crank that spins without moving the sash, or a window that suddenly won’t seal against a North Texas wind.
Dallas heat does not forgive a failed seal. When the desiccant inside the IGU saturates, you get that milky haze between the glass that no amount of Windex touches. The window still opens, the house still cools, but the unit is done. That’s the part you’re replacing, and it’s a very fixable problem.
Which PGT Models This Applies To
We replace parts across PGT’s residential lines, including the WinGuard, SpectraGuard, ClassicVue, and Eze-Breeze series. The WinGuard line is the one we see most often in Dallas, particularly in homes built after big hailstorms pushed impact-glass requirements into more neighborhoods. Each PGT window has a product ID etched into the corner of the glass or printed on a label on the frame’s edge. That ID tells us the series, glass makeup, and original spacer type, which matters more than most homeowners realize.
Here’s the compatibility gotcha: PGT’s WinGuard line uses a proprietary impact laminate that bonds two panes around a PVB interlayer. An aftermarket IGU without that interlayer will fit the frame but won’t hold the impact rating, and in some Dallas suburbs that can affect your insurance premium. We carry OEM PGT glass when the window’s still under warranty, and quality aftermarket units with matching laminate when it isn’t. CGI, CWS, and ES Windows parts have similar sizing concerns, so we verify the label before we order anything.
Signs Your PGT Window Replacement Is Failing
- Fog or haze between the panes. The seal has failed and moisture is inside the IGU. In Dallas, the thermal cycling between 105° July days and 40° December nights accelerates seal failure, especially on west-facing windows. Once fog appears, the insulating gas is gone and the glass can’t be cleaned from inside.
- Draft you can feel with the window closed. The weatherstripping or the sash seal has compressed or degraded. On PGT casement windows, the compression seal around the sash is often the first soft part to go. You’ll feel it most where the window meets the frame at the bottom corners.
- Visible condensation on the room-side glass. Intermittent condensation isn’t always a seal failure, but if it forms between the panes or persists for hours after sunrise, the unit’s thermal barrier is compromised. High indoor humidity in a Dallas summer can make a borderline seal fail visibly within one season.
- Crank or handle that turns without moving the sash. On PGT casement and awning windows, the operator gear strips after years of use, especially if the window’s been forced open against a stuck seal. When the crank spins freely, the operator is shot, not the glass. We replace the operator assembly and re-lubricate the hinges in the same visit.
- Window won’t latch or lock. Frame settlement and repeated thermal expansion shift the alignment over time, and the locking keeper no longer lines up. On a PGT window, this is often a clip or keeper adjustment rather than a full unit replacement. If the frame itself has warped, that changes the scope.
Replacement Cost & What’s Included
In Dallas, a single PGT window replacement runs $450 – $1,100 installed. A fogged IGU swap on a standard double-hung runs $450 – $700. A full sash replacement with impact glass runs $700 – $1,100. Casement operators and hardware replacements run $150 – $350. These ranges include the part, labor, disposal of the old unit, and a written line-item quote before we touch anything.
What drives the range: glass size, whether it’s impact-rated laminate or standard insulated glass, low-E coating (a thin coating that blocks heat while letting light through), and whether the frame needs realignment. We put the price in writing before work begins, and that price doesn’t change once we start. Every PGT replacement we install carries our written guarantee, and if the repair fails, the second visit is free.
DIY or Call Us?
You can safely check the product ID label on your PGT window and note whether the fog is between the panes or on the room side. You can also test the crank and lock to narrow down what’s failed. What we’d caution against: pulling the sash out of a PGT frame on your own. The balance system on double-hungs is under tension, and impact-grade sashes are heavy enough to injure you or crack a tile floor if they come loose mid-removal. Glass replacement on a laminated IGU isn’t a caulk-and-optimism job.
If you’ve identified the part and just want it handled, call us at (361) 203-9040. We’ll match the part to your PGT model, quote the installed price, and send a technician who’s background-checked, identity-verified, and pre-announced by name and photo before the visit.
FAQs
PGT window seals typically last 10 – 20 years in the Dallas climate, with west- and south-facing windows failing on the earlier end due to constant sun exposure and thermal expansion. Insulated glass units are a wear item, not a lifetime component. Call (361) 203-9040 and we’ll inspect the whole row while we’re there.
A fogged PGT window generally cannot be repaired; the failed seal has to be replaced, either by swapping the IGU or the full sash. Anyone offering to “defog” the glass is buying you a few months at best. The honest fix is a new unit, and we’ll quote the exact price before work starts.
Most single PGT window replacements take 60 – 90 minutes from truck arrival to cleanup, and we carry common IGU sizes and hardware on the truck in Dallas. If your unit needs to be ordered from PGT or cut to a custom size, we’ll give you the lead time in writing. Call (361) 203-9040 to find out if yours is a same-visit job.
We stock common PGT-compatible glass units, operators, balances, and weatherstripping in our Dallas trucks, and we order OEM PGT parts when the warranty or impact rating requires it. Hale Windows Dallas is an independent service provider, not affiliated with PGT, which means we can match the right part at the right price instead of defaulting to the most expensive option.
If a PGT window is giving you trouble, the most useful thing you can do is read the ID etched in the glass before you call. Then call us at (361) 203-9040. We’ll quote the replacement in writing, send a technician you can see by name and photo before the door opens, and stand behind the work with our 365-Day Done Right Promise: if it’s not done right, we make it right.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.