New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Replacement: The Dallas Owner’s Guide
We replace Mr-Glass windows across Dallas, and most single-unit swaps run $450 to $950 installed depending on glass package and frame condition. We stock Mr-Glass-compatible insulated glass units (IGUs) on our trucks, so a failed window is often replaced in one visit. You’ll usually know the window has failed before you touch it: the glass fogs between the panes, condensation sits inside the unit after a rain, or the room just never feels comfortable anymore. Dallas heat does not give a window a gentle retirement. It cooks the seal until the argon escapes and the glass gives up.
Which Mr-Glass Models This Applies To
Mr-Glass makes aluminum and vinyl window systems used across Texas, and the replacement part is almost always the IGU, not the entire frame. Here is what we look for before ordering glass.
First, check the corner of the sash. Mr-Glass etches or labels most units with a manufacturing code that tells us the glass dimensions, spacer type, and whether it is tempered. Second, measure the visible glass only, not the frame. We need the exact IGU thickness, and Mr-Glass units commonly run 7/8 inch or 1 inch, which matters when we order. Third, if the label is gone, we can identify the unit from the frame profile and original install era, but it takes a caliper and a few minutes on site.
We source OEM Mr-Glass IGUs when the window is under warranty or the customer prefers factory-matching glass. For older units out of warranty, a quality aftermarket IGU with matching low-E coating and spacer bar often saves $120 to $200 per window and performs the same. We will lay out both numbers before you decide. Hale Windows Dallas is an independent service provider, not affiliated with Mr-Glass, so we give you the honest choice rather than a sales pitch.
Signs Your Mr-Glass Window Replacement Is Failing
- Fog between the panes you cannot wipe away. This is the big one. The seal has failed, moisture is inside the IGU, and the argon fill is gone. The glass is not dirty; it is dead.
- Condensation on the inside of the glass after a cold night. It appears in the morning and fades by noon. That is humidity breaching the seal, not a housekeeping problem.
- The window feels hot to the touch from inside during a Dallas afternoon. A failed low-E coating or lost gas fill turns a window into a solar panel pointed at your living room. Your AC works harder and your bills show it.
- Draft around the sash edges or a sash that only moves with real effort. The IGU may be intact, but the sash assembly or weatherstripping has worn. We quote the fix honestly, often without touching the glass.
- Visible white film or haze building along the bottom edge of the pane. Moisture has been getting in for months. The haze is mineral deposits left behind as water evaporates inside the unit.
Replacement Cost & What’s Included
In Dallas, expect to pay $450 to $950 per Mr-Glass window replaced, installed. The spread is driven by size, glass package, and whether the sash needs rework. A basic 36 by 60 inch clear IGU may run $450 installed; the same window with high-performance low-E and argon runs $650; a large tempered unit with a wood-look interior can reach $950.
Every quote is a written, line-item price before we pick up a tool. That price includes the IGU, sash disassembly, proper setting and shimming, new glazing bead where needed, cleanup, and disposal of the failed unit. No change orders. No handshake math at the end. Our work carries a written guarantee, and if the repair fails, we return free under our 365-Day Done Right Promise. Spencer Odell has kept a running list of every unit we have put in, so if something fails years later, we know exactly what went in the opening.
DIY or Call Us?
You can safely check the label, measure the glass, and note where the fog sits. That helps us quote faster. Replacing an IGU in an aluminum Mr-Glass frame is a different job than a vinyl snap-in, and doing it wrong means a window that leaks air, holds water in the track, or cracks under its own weight when the season shifts.
If the unit is large, tempered, or on an upper floor, let us handle it. A 60 pound IGU on a ladder in a Dallas wind gust is not a weekend project; it is an ER visit. Most Mr-Glass replacements take one visit when we have the measurements. Call (361) 203-9040 and we will give you a straight number over the phone before scheduling.
FAQs
In North Texas, expect 12 to 18 years before the seal fails on a Mr-Glass IGU. South and west-facing windows die first because the sun hits them harder. We regularly replace 15-year-old units in Lakewood and Oak Cliff while north-facing windows in the same house still look new. Mr-Glass does not publish a seal warranty on all lines, so ask us to check your unit’s code before assuming coverage.
No. Once the seal fails and moisture is inside, the IGU cannot be cleaned or resealed in a way that lasts. Companies that drill and drain the glass are selling a temporary fix for about $150 that fails again, usually within a year. Replacement is the honest repair. Call (361) 203-9040 and we will confirm that on your window before anything gets ordered.
A single Mr-Glass window swap takes one to two hours on site. We quote the visit in advance, arrive with the right IGU, and leave the room as we found it. Multi-window jobs may take a full day, and we will tell you that when we write the estimate.
We stock common Mr-Glass IGU sizes on our trucks and order custom units for unusual dimensions or specialty glass packages. Custom orders typically arrive in five to seven business days in Dallas. We will tell you which path your window needs before you commit to anything.
If the unit is still covered, we will help you file the Mr-Glass claim and install the replacement glass when it arrives. You pay labor, not the part. We also handle the confirmation paperwork so you are not on the phone with a manufacturer for three afternoons. We service replacement parts for PGT, CGI, and CWS systems as well, so you do not need a different company for each brand.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.