New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Dallas, TX | Hale Windows Dallas
We provide independent ES Windows repair and replacement across Dallas, working on the 7700, 7800, 8700, and 7900 series. We’re not manufacturer-affiliated, which means our repair-or-replace advice is based on what’s best for your house, not what protects a warranty contract. The thing that separates our ES Windows work in Dallas is simple: we fix the window and the opening around it, because in this city hail and heat attack both. Spencer Odell, our owner, walks every finished job before the crew loads the truck. Call (361) 203-9040 for a free estimate on any ES Windows service in Dallas.
Why Dallas Residents Choose Us for ES Windows Service
Most window companies in Dallas will happily sell you a new unit. Fewer will tell you the truth about whether your existing ES Windows frame is worth keeping. We’ve serviced ES Windows installations across Dallas for years, from original 1980s single hungs in Lakewood to newer horizontal rollers in Far North Dallas. That field time means we know which failure modes show up in which neighborhoods, and we stock OEM hardware for the common ones. Spencer trained at Los Angeles Trade-Technical College and has been replacing windows and entry doors across the Dallas-Fort Worth area long enough to know that North Texas weather punishes aluminum frames differently than coastal air or desert heat. If you’re looking for ES Windows sales & service from a crew that actually understands the brand, that’s us.
We work under the 365-Day Done Right Promise. If the repair isn’t right, we make it right, no argument needed. That’s a written guarantee on every job, not a verbal assurance. And before anyone arrives at your door, you’ll get the technician’s name and photo by text, so you know exactly who’s coming. That’s the Threshold Standard: background-checked, identity-verified, photo-badged, and pre-announced, every time.
Common ES Windows Windows & Doors Problems We Solve in Dallas
ES Windows builds a solid aluminum product, but Dallas conditions find the weak points. Here’s what we see most often on service calls throughout the city:
- Hail-pitted and bent aluminum frames. A storm rolls through, golf-ball hail smacks the frame, and suddenly the sash doesn’t sit square. Common on 1980s and 1990s ES Windows installations in East Dallas. We assess whether the frame can be straightened and re-sealed, or whether replacement is the honest answer.
- Worn nylon rollers in horizontal sliders, including the 8700 series. Dallas dust is fine and relentless. It works into the tracks, mixes with humidity, and grinds the nylon rollers down to nothing. The panel gets stiff, then heavy, then it won’t move at all. We replace the rollers with OEM hardware and deep-clean the aluminum track.
- Fogged dual-pane glass from failed seals. A decade of 100°F summers and intense UV exposure breaks down the sealant between panes. Once moisture is inside, the only fix is glass replacement. We source ES Windows-compatible dual-pane units and reset the glazing properly.
- Deteriorating weatherstripping and corner seals on casement and awning windows. Spring storms drive wind-blown rain against the window, and old seals let it through. You feel the draft in July and see the water stain in March. We replace the weatherstripping and re-seal the corners, then check the aperture flashing around the frame.
- Stiff or jammed single hung and double hung sashes. The 7700 and 7800 series use balance systems that wear out over time. When the window won’t stay open, or drops shut on your fingers, it’s usually the balance, not the frame. We rebuild the sash hardware and test operation before we leave.
ES Windows Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic window repair page. In Dallas’s Lakewood and Casa View neighborhoods, original ES Windows from the 1980s and 90s often fail not just from age, but because the aluminum frames were never properly flashed when they were installed. During spring hailstorms, water doesn’t just hit the glass. It drives behind the siding, runs down the wall cavity, and soaks the framing around the window. The glass looks fine. The window operates fine. But inside the wall, wood is quietly rotting. Our repair approach in these neighborhoods always includes checking and repairing the aperture flashing around the unit, not just the window itself. That’s the difference between fixing a symptom and fixing the problem. Drive through Lakewood on a quiet afternoon and you’ll spot mid-century homes with original aluminum windows so pitted and warped they no longer seal. A realtor will tell you the first upgrade recommendation is always the same: replace the windows before the Texas heat kills your AC bill. We’d add one thing: check the flashing while you’re at it.
Our tech recently serviced an ES Windows 8700 Horizontal Roller in a Lakewood home where the owner said the panel was “too heavy to slide.” After pulling the sash, we found the original nylon rollers had disintegrated into gritty fragments, and the track was packed with baked-on dust. We replaced the rollers with OEM hardware and deep-cleaned the aluminum track. The window now glides with one hand, and we sealed the exterior perimeter with new flashing to prevent future hail-driven water intrusion. That’s the full job.
ES Windows Models & Products We Service in Dallas
We service the full ES Windows residential line that’s common across Dallas: the 7700 Series Aluminum Single Hung, the 7800 Series Aluminum Double Hung, the 8700 Series Horizontal Roller, and the 7900 Series Casement. For critical hardware like locks, rollers, and hinges, we source OEM ES Windows parts whenever they’re available. When OEM is discontinued or priced unreasonably, we’ll recommend a quality aftermarket alternative for items like weatherstripping and glazing, and we’ll tell you why. We keep common ES Windows hardware stocked locally for faster turnaround, so a repair in Dallas doesn’t wait a week for a part to ship from Florida. Our honest assessment: if the frame is square and sound, repair is usually the best value. If hail has pitted, warped, or twisted the frame, replacement is more durable. We’ll show you the evidence and let you decide.
ES Windows Service Pricing in Dallas
What you’ll pay depends on what’s wrong, not on what we think you’ll spend. Here’s what we typically see in Dallas:
| Service | Typical Range in Dallas |
|---|---|
| Single roller or hardware repair | $95 – $225 |
| Dual-pane glass replacement (fixed or picture window) | $350 – $900 depending on glass package |
| Casement weatherstrip and corner seal replacement | $180 – $450 |
| Full frame replacement (per opening, labor and materials) | $1,100 – $2,800 depending on series and size |
Energy-efficient glass upgrades, like low-E coatings or impact-resistant packages, add to the material cost, and we’ll walk you through the real payback before you commit. Every estimate is written, line-item, and fixed. No change orders unless you ask for something different. Call (361) 203-9040 and we’ll send someone to measure and quote. The estimate is free.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Dallas
Yes, if the frame is still square and the track is intact. We pull the sash, assess the frame for pitting or warping, and replace the glass if the frame is sound. If the hail damage has bent the frame enough that the sash no longer sits flush, we’ll be honest and recommend replacement. Call (361) 203-9040 for a free assessment, and we’ll show you the frame condition before we quote anything.
In almost every case we see, it’s degraded weatherstripping, failed corner seals, or missing aperture flashing, not the window itself. Dallas spring storms drive rain sideways. Old seals let it through. We replace the weatherstripping, re-seal the corners, and check the flashing around the frame, because that’s where hidden rot comes from in this city.
If the frame is straight and the only issue is hardware, weatherstripping, or glass, repair is absolutely worth it. A 7700 Series single hung with a failed balance or fogged glass can be rebuilt for a fraction of replacement cost. If the frame is pitted from hail or out of square, replacement is the more durable choice. We’ll show you why with the window in front of you. Call (361) 203-9040 for a free estimate.
We pull the sash, remove the old rollers, deep-clean the aluminum track, and install OEM replacement rollers. Then we lubricate and test the operation until the panel glides. Dallas dust will always find its way into slider tracks, so we also check the weatherstrip and recommend a simple maintenance routine to keep it from locking up again.
In most cases, yes. ES Windows offered a range of finish options, including bronze anodized. We can source a matching new unit and also handle touch-up on the surrounding frames so the replacement doesn’t stand out from the street. If you’re dealing with an HOA that cares about uniformity, this is a common request in Dallas neighborhoods, and we can help with the paperwork. Call (361) 203-9040 to discuss your specific finish.
Service Areas Near Dallas
We run ES Windows service calls across Dallas service area and into the surrounding cities. If you’re in Far North Dallas, Carrollton, or Farmers Branch, we’re already in your neighborhood regularly. For homeowners farther north, see our ES Windows service in Plano and ES Windows service in Richardson pages for local details. We keep our routes tight so response times stay short across the metro.
Book Your ES Windows Service in Dallas Today
If your ES Windows are fogged, stuck, leaking, or hail-beaten, don’t wait through another Dallas summer. Call (361) 203-9040 to schedule a free estimate. A live person answers every call, 24 hours a day. We’ll send you the technician’s name and photo before arrival, put the price in writing, and back the work with a 365-Day Done Right Promise. If we wouldn’t put it in our own house, we’re not putting it in yours.
Written by Spencer Odell, Owner at Hale Windows Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.