New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Front Door Replacement in Dallas: What to Know First
CGI front door replacement in Dallas typically runs between $2,800 and $7,500 depending on the door slab, impact glass package, and whether the frame needs rebuilding. We’re an independent CGI service provider, not a manufacturer-authorized dealer, which means we source parts honestly and tell you when an aftermarket component will hold up just as well as OEM. Most CGI front door replacements around Dallas take one full day on site once the door is in hand, and lead time for custom CGI units runs four to eight weeks.
If you own a CGI product and the front door is warping, leaking air, or failing at the threshold, you’re in the right place. We’ve been replacing entry doors across Dallas since 2009, and we quote every job in writing before work begins. Call (361) 203-9040 to schedule a free estimate and get real numbers for your specific door.
How CGI Products Fail – and How We Fix Them
- CGI Estate Collection slab delamination at the stile edges. The Estate line uses a wood-grain interior laminate over an aluminum core. After enough Dallas sun exposure, the laminate lifts at the vertical stiles and the door starts catching on the jamb. We’ve opened up enough of these to know it’s not the homeowner’s fault – it’s a bonding failure that shows up around year eight to twelve. Fix is a full slab replacement with proper flashing, not a caulk seam.
- CGI Bordeaux series threshold corrosion from sprinkler overspray. Dallas irrigation systems are brutal on aluminum thresholds, especially in neighborhoods like Lake Highlands and Preston Hollow where yards get watered daily. The Bordeaux’s threshold sits low and collects mineral-laden water, which eventually eats through the sill and lets water wick into the subfloor. We rebuild the threshold with sealed end caps and slope the landing away from the house.
- CGI Targa impact door hinge sag on heavy glass units. Full-lite impact doors with 5/16-inch laminated glass weigh well over 200 pounds. The factory hinges on the Targa line hold up fine for years, but once the lower hinge pin wears, the door drops and the strike plate misses alignment. We realign and replace hinges with ball-bearing units rated for the slab weight, which keeps the multipoint lock engaging cleanly.
- Sweep and weatherstrip failure on south-facing doors. Any CGI door hit by direct afternoon sun in Dallas – think homes in Oak Cliff or east-facing entries in Mesquite – will cook the vinyl sweep and side seals within five to seven years. The door slab is usually fine; the seal isn’t. We replace the weatherstripping with a silicone-based bulb seal that holds up better against UV exposure than the factory vinyl. It’s a $180 to $340 fix versus a five-figure door replacement.
- Frame rot at the base of the side jambs on patio-adjacent entries. This is less about CGI and more about how the original installer flashed the rough opening. When we see a CGI door that’s sagging or locking poorly, we often find the bottom six inches of the side jambs are soft from water wicking up from unflashed sill pans. Our fix is a full frame-and-slab replacement with a proper pan, not shimming a rotten frame and hoping it holds.
Our CGI Front Door Replacement Process
- 1
Call and talk to a live person. You call (361) 203-9040, a real human answers, and we schedule a free estimate at a time that works for you.
- 2
We measure and diagnose on site. We bring a photo-badged, background-checked technician to your door – you’ll know their name and face before they arrive. We measure the slab, check the frame, look at the exposure, and figure out whether we’re replacing the slab only or the full unit.
- 3
Parts decision: OEM vs quality aftermarket. For CGI doors, we use OEM slabs when warranty coverage matters or the match has to be exact. For things like sweeps, hinges, and weatherstripping, we spec aftermarket components that perform equal to or better than factory on a Dallas-specific basis. You’ll know exactly what you’re paying for and why.
- 4
Written price before any work starts. We hand you a line-item quote that covers the door, hardware, flashing, sealant, and any frame work. No change orders, no surprises on the invoice. If the price on paper is the price you pay, it’s the price you pay.
- 5
Installation day. We pull the old door, set the new one, flash it properly, hang it square, and adjust the multipoint lock until the throw operates smoothly. We clean up the work area and haul the old door away.
- 6
Walkthrough and warranty. Spencer Odell personally walks every finished job before the crew loads the truck. You get a written guarantee on the installation, covered under the 365-Day Done Right Promise: if it’s not right, we make it right.
What CGI Front Door Replacement Costs in Dallas
| Scenario | Typical Range |
|---|---|
| Slab-only replacement (standard CGI Estate or Targa, no glass package change) | $2,800 – $4,200 |
| Full unit replacement with impact-rated glass (hurricane-rated laminated) | $4,500 – $7,500 |
| Frame rebuild with new slab (rot repair, sill pan, flashing) | $3,800 – $6,000 |
| Weatherstripping and sweep replacement (south-facing door seal failure) | $180 – $340 |
| Hardware upgrade: ball-bearing hinges, multipoint lock adjustment | $220 – $480 |
What moves the price: glass package (standard vs impact-rated laminated), whether the frame is salvageable, door size (custom widths on older Dallas homes run up the cost), and whether we’re matching an existing CGI finish or ordering a stock color. Every quote is written and fixed before we start. Call (361) 203-9040 for a free estimate with actual numbers for your door.
Why Dallas Homeowners Call Hale Windows Dallas for CGI Work
We put in doors the way we’d want them put in on our own homes. That’s not a slogan – Spencer Odell’s rule is simple: “If I wouldn’t put it in my own house, I’m not putting it in yours.” Every job gets a written price before work begins, every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit, and every installation is covered by our documented 365-Day Done Right Promise. If the work isn’t right, we make it right – no argument, no fine print.
When a CGI door isn’t the right fix – maybe the frame is fine and you’d be better served with a PGT or CWS unit – we’ll tell you that. We install and service eight professional door and window lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We match the product to the job, not the other way around.
FAQs
Replacing the door slab or full unit with a new CGI product does not void anything – you’re installing a new product. The key warranty-safe practice on a slab-only replacement is proper installation: a misaligned slab that rubs the frame or a poorly flashed threshold can cause premature failure, and CGI’s warranty (like most manufacturers) excludes damage from improper installation. We install to the same standard CGI specifies, and our labor is covered under our own written 365-Day Done Right Promise on top of that. Call (361) 203-9040 if you’re unsure whether to repair or replace – we’ll give you an honest read for free.
CGI fronts are special-order in most cases, since the company is based in Florida and not every distributor stocks the full line in North Texas. Factory slabs typically run four to eight weeks. Common hardware – hinges, multipoint lock components, sweeps, and weatherstripping – is available much faster, and where factory parts are backordered we can often spec an aftermarket equivalent that performs better under Dallas UV and irrigation conditions. We’ll tell you both options and what they cost before you decide.
A slab-only replacement on a standard CGI Estate or Targa front door in Dallas ranges from $2,800 to $4,200, while a full unit with impact-rated glass runs $4,500 to $7,500 depending on size, finish, and frame condition. Weatherstripping-only fixes are $180 to $340. Every job gets a written, fixed price before we start. Call (361) 203-9040 for a free estimate on your specific door.
Yes, in many cases. Seal failure, hinge sag, lock misalignment, and threshold corrosion on CGI doors are often repairable without replacing the slab – but we’ll tell you plainly if a repair is a short-term patch. If the slab is delaminating at the stiles or the frame is soft at the jambs, replacement is the honest call. We quote both options, line by line, so you can decide with real numbers in front of you.
Once the new slab or unit is on hand, most CGI front door replacements in Dallas take one full day on site. Lead time for factory-ordered CGI doors is typically four to eight weeks. If you need something sooner, we’ll show you comparable PGT, CWS, or Therma-Tru options that may be available faster – and we’ll give you the same written, fixed pricing either way. Call (361) 203-9040 to get a timeline for your door.
Ready for a written estimate on your CGI front door replacement in Dallas? Call (361) 203-9040 and talk to a live person – no voicemail, no callback queue. We’ll schedule a free on-site estimate, measure your door, and hand you a fixed price before any work begins.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.