New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Front Door Replacement Across University Park
Front door replacement in University Park typically runs $3,400 to $9,800 for a custom unit, with premium architectural doors on Golf Drive or Fairway estates reaching $14,000 or more when custom millwork and impact-rated glazing are specified. Most of our University Park jobs are quoted in writing within 48 hours of the site visit, and we coordinate directly with your architect or designer so the door matches the home’s original character. If you’re weighing a replacement and want a real number, not a vague range, call (361) 203-9040 and we’ll walk the project with you.
We know University Park doors because we’ve replaced, rebuilt, and restored them for years. The homes here are different from what you’ll find ten minutes away in Dallas or Plano. They’re older. They’re custom. And the doors carry architectural weight that a tract home never will.
Key Takeaways
- Front door replacement in University Park typically costs $3,400 to $9,800, with custom estates running higher.
- Lead times of 10 to 14 weeks are normal on this tier; labor is only two days. The schedule is set by millwork and glazing fabrication, not installation.
- We match original 1920s through 1960s door profiles, including stile and rail proportions, panel configurations, and casing profiles.
- Every quote is a written, fixed price delivered before any order is placed. No change orders on millwork unless you change the scope.
- Call (361) 203-9040 for a free estimate. A live person answers, 24/7.
Why Hale Windows Dallas Is University Park’s Preferred Front Door Replacement Company
University Park homeowners call us because we speak the language of custom homes. We’ve worked on original steel casement windows near SMU where the bronze hardware predates World War II. We’ve rebuilt thresholds on Preston Road estates where the door was older than the current owner’s parents. That context matters when you’re deciding whether to repair or replace.
Our crew lead, Spencer Odell, has been with Hale since 2009 and personally reviews every University Park quote involving custom millwork or specialty glazing. If your door profile needs to match a 1920s original, Spencer’s the one who specs it. He’s worked with architects across University Park and knows which questions to ask before you order a $7,000 door that won’t clear the existing jamb.
We also understand the trust question here. University Park homeowners are careful about who walks up the driveway. Every Hale technician arrives background-checked, identity-verified, uniformed, and photo-badged. You get the tech’s name and photo before the visit. That’s our Threshold Standard, and it’s not optional.
Entry Door Replacement in University Park
Entry door replacement in University Park means something different than it does in a 1990s subdivision. We’re usually matching original stile and rail proportions, preserving sightlines, and working with your architect to keep the facade period-correct. A basic painted fiberglass entry door on a smaller University Park home starts around $3,400 installed. A custom Therma-Tru or Mr-Glass unit with hardwood stiles, impact glazing, and a factory finish runs $6,500 to $9,800. Add custom millwork, a transom, or architectural sidelights and the price climbs accordingly.
Every entry door quote in University Park is a written, line-item price. You’ll see the door, the hardware, the glazing package, the millwork, and the labor broken out before you sign anything. Once you approve, that price is fixed. We order the door, and we absorb supplier price swings, not you.
Custom Millwork and Profile Matching
On a 1920s Fairway estate, the door isn’t just a door. It’s a panel configuration, a casing profile, a threshold height. We mill to match original profiles, including the way the stiles meet the rails and the reveal on the casing.
Architect Coordination
If your architect is specifying the door, we work from their drawings and flag anything that won’t perform in North Texas weather before it gets ordered. We’d rather have that conversation before fabrication than after delivery.
Exterior Door Replacement in University Park
Exterior door replacement in University Park covers more than the front entry. We replace side doors, rear doors, and service doors on carriage houses and detached garages throughout the city. These jobs are often less visible, but they still need to seal, lock, and hold up to the same UV and thermal stress as the front door. A painted steel exterior door starts around $2,800. A wood-look fiberglass door with a factory finish and composite frame runs $4,200 to $6,500.
The question we hear most on exterior doors in University Park is whether to match the front door or save money with a simpler unit. Our answer: match where sightlines demand it, save where nobody sees it. We’ll give you a straight recommendation and the price difference in writing.
Weather Sealing and Thermal Performance
University Park sees temperature swings from 15 degrees in February to 105 in August. A poorly sealed exterior door leaks conditioned air year-round. We spec weatherstripping, sill pans, and thresholds that hold up to that cycle.
Security and Hardware
Exterior doors on University Park properties are often secondary entry points, which makes them a security concern. We install multipoint locks and reinforced strike plates where the home’s original hardware won’t accept modern security upgrades.
Trusted Brands We Service in University Park
We install and service doors from Therma-Tru, Mr-Glass, ViewLux, and PGT, among others. That product depth matters in University Park because the right door for a 1920s Fairway estate isn’t necessarily the right door for a 1960s ranch near the SMU campus. We don’t push one brand. We spec the door that matches the architecture, the climate, and your budget. For University Park customers, we keep common replacement parts and hardware on hand for faster turnaround when a door needs service rather than replacement. If your existing door is worth saving, we’ll tell you before we try to sell you a new one.
Common Front Door Replacement Problems We See in University Park Homes
- Warped solid wood doors from 1920s through 1960s construction. North Texas heat and humidity cycles cause original wood doors to bind at the top or bottom. The fix is often a custom replacement that mirrors the original profile, not a shim and a prayer.
- Original steel casement windows with bronze hardware that homeowners won’t part with. When we replace the front door on older estates near SMU, we frequently coordinate door hardware finishes with existing bronze casement hardware so the entry doesn’t clash with the windows.
- Oversized replacements that fail historic review. University Park is particular about preserving architectural character. A generic 8-foot door with clamshell casing can kill the look of a 1930s colonial. We mill to match original casing profiles and panel configurations.
- Entry doors without impact-rated glazing. Hail season in University Park is real. If your door has glass, it should carry a Miami-Dade NOA or Florida Product Approval and a large-missile rating. Homeowners who skip this sometimes discover their insurer won’t offer wind mitigation credits on the door.
Pricing for Front Door Replacement in University Park, TX
Here are straight numbers for University Park. Entry door replacement with a quality fiberglass or steel door runs $3,400 to $6,500 installed. A custom wood door with matching millwork and factory finish: $7,000 to $12,000. A full architectural entry system with sidelights, transom, and impact-rated glazing: $12,000 to $18,000 or more on Golf Drive estates. Exterior side and rear doors land between $2,800 and $6,500.
What moves the price: custom millwork profiles, glazing package, hardware grade, and whether the existing jamb can be reused or needs full replacement. What doesn’t move it: our labor is a fixed line item, and the price we write is the price you pay. Call (361) 203-9040 for a free written estimate. We’ll come out, take measurements, and give you a real number.
We Also Serve Cities Near University Park
Hale Windows Dallas serves University Park and the surrounding North Texas communities, including Dallas, Plano, Richardson, and Far North Dallas. If you’re nearby and need a Front Door Replacement specialist who understands custom homes, call (361) 203-9040 and we’ll schedule a visit.
Serving University Park, TX - Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Front Door Replacement in University Park
Yes. We mill stiles, rails, panels, and casing to match the original profiles on your door. On a recent Golf Drive estate, we replaced a warped wood entry with a Therma-Tru custom-milled unit that matched the original 1920s stile and rail profiles exactly, down to the panel reveal. If you have the original door or good photos, we can match it. If you don’t, we can pull profiles from similar homes in the neighborhood. Call (361) 203-9040 and ask for Spencer Odell to review your door.
We don’t touch the window hardware unless you ask us to repair it. When we install a new front door on homes with original steel casements, we coordinate the door hardware finish with the existing bronze so the entry doesn’t read as an add-on. If the bronze hardware is worn, our techs repair rather than replace the sash hardware to retain the architectural integrity. It’s a University Park-specific detail most door companies never notice. Call (361) 203-9040 to discuss your hardware.
For University Park, we recommend low-E insulated glass with an SHGC under 0.25 for any door with glass. That blocks heat while letting light through. If your door faces west or southwest, we often spec an additional tint or a laminated glass interlayer for UV protection on interiors. On a Golf Drive project, we specified exactly that setup for an impact-rated Therma-Tru door, and it’s performing well through multiple hail seasons. Call (361) 203-9040 for a glazing recommendation specific to your door’s orientation.
Yes, and we prefer it. On that Golf Drive job, our team coordinated directly with the architect to specify a low-E insulated glass unit with the right SHGC for the door’s orientation. We’ve worked with architects and designers across University Park, and we’re comfortable taking drawings, redlines, and material specs. Our role is to make sure the door your architect designs actually performs in North Texas heat and hail. Call (361) 203-9040 and we’ll set up a call with your architect before we quote anything.
Because the door is being made, not pulled from a shelf. Custom millwork, matched profiles, and specialty glazing are fabricated to order. That fabrication is the long pole, not our installation labor. We quote lead times honestly on University Park jobs because we know you’re planning around them, and we don’t pad them to look good later. The written price you get before we order includes the full lead time. Call (361) 203-9040 if you want to know current lead times for a specific door and glazing package.
Get Your Free Front Door Replacement Estimate in University Park
If you’re ready to talk numbers on a front door replacement in University Park, call (361) 203-9040. A live person answers, day or night. We’ll schedule a site visit, take measurements, and give you a written, fixed price before any order is placed. If the work isn’t done right, our 365-Day Done Right Promise means we make it right. No argument, no invoice. That’s the Hale way, and it’s been that way since 2009.
Written by Spencer Odell, Owner at Hale Windows Dallas, serving University Park since 2009.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.