New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Horizontal Roller Windows in Dallas, TX
Horizontal roller windows, sometimes called sliding windows, open side to side along a track instead of cranking outward or lifting up. In Dallas, where ranch-style homes from the 1960s and 70s still dominate neighborhoods like Lake Highlands, Casa View, and Preston Hollow, these windows show up constantly, especially over kitchen sinks, along patios, and in bedrooms facing side yards. For a more complete look at how this fits into the bigger picture, see our Window Installation in Dallas page.
Hale Windows Dallas installs and repairs horizontal roller windows using professional-grade product lines including ES Windows, Mr-Glass, and ECO Window Systems. We’ll give you a written price before any work starts, and every job is covered by our 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fine print. Call (361) 203-9040 and a live person answers, 24 hours a day.
Here’s what matters most: horizontal roller windows in Dallas typically run $420 to $980 per window installed, depending on size, frame material, glass package, and whether the existing opening needs reframing. A basic vinyl slider in a standard 36-by-48 opening usually lands near the lower end. A larger aluminum or thermally broken frame with low-E glass and impact-rated glazing can reach the upper end fast. We’ll get into exact numbers further down.
What Are Horizontal Roller Windows, Exactly?
A horizontal roller window has two or more sashes, and at least one of them slides horizontally along a bottom track. The moving sash rides on rollers, hence the name. Some models let both sashes move; others keep one sash fixed while the other glides. The track sits in the sill, and the sashes interlock at the center when closed, which is where the weather seal lives.
Dallas builders have used these windows for decades because they are simple, inexpensive, and hold up well in our climate. The horizontal opening design means you get full ventilation without a sash projecting into a walkway or patio, which is why you see them on ground-floor bedrooms and kitchens that open onto covered porches in neighborhoods from Oak Cliff to Garland.
There are two main track types. Older Dallas homes often have single-track rollers, where the moving sash rests directly on a wheel assembly screwed into the bottom rail. Newer construction and better replacement windows use a dual-roller carriage that spreads the weight and keeps the sash from wobbling. When we replace a horizontal roller window in an older home, we almost always upgrade the roller system at the same time. The difference in operation is night and day.
When You Need Horizontal Roller Windows
You may already know it’s time. But if you’ve been living with a sticky track or a draft and wondering whether it’s worth the call, here are the specific signs we see in Dallas homes every week:
- The sash drags or groans when you slide it. Over years of Dallas heat and dust, roller bearings grind down, and the track accumulates grit. A window that takes two hands to open isn’t just annoying; it means the rollers are failing and the frame is wearing unevenly.
- You can feel air moving around the closed sash. Horizontal rollers seal at the interlock and along the track. When the weatherstripping flattens or the sash sags, outside air creeps in. In a Dallas July, that’s your air conditioning leaking out the window.
- Condensation between the panes. If you see fog or water droplets you can’t wipe away from either side, the insulated glass unit has lost its seal. That means argon or krypton gas has escaped and the glass’s insulating value is gone. Repair requires replacing the sash or the glass package.
- The lock no longer aligns. When rollers wear down or the frame settles, the sashes don’t meet at the same height, and the lock can’t engage. We regularly see this in North Dallas homes built on clay soil, where foundation movement shifts window openings by a quarter inch or more.
- The window is original to a home built before 1990. Single-pane aluminum sliders from that era have almost no insulating value. Dallas summers punish them from June through September, and the utility savings from a modern low-E replacement can be significant.
- You’ve already replaced other windows and this one sticks out. Mismatched window styles and colors look conspicuous, and the comfort difference between an old slider and a new one is immediately obvious.
None of these are conditions to ignore. A horizontal roller window that won’t close fully is a security and energy problem, and a roller mechanism that’s grinding metal against metal will eventually fail hard, leaving you with a stuck-open window until it’s repaired. If you call us, we’ll tell you whether a repair makes sense or a replacement is the honest answer. Call (361) 203-9040.
Our Horizontal Roller Windows Process
Here’s exactly what happens when you call Hale Windows Dallas about a horizontal roller window:
- You call and a live person answers. Always. 24/7. You describe the window, and if you can snap a photo and text it over, that helps, but it’s not required. We’ll schedule a time that works for you, and before the visit, you’ll receive the technician’s name and photo by text or email. This is our Threshold Standard: background-checked, identity-verified, photo-badged, and pre-announced. You know who’s coming to your door before they knock.
- We measure and diagnose. The technician checks the frame, track, rollers, interlock, weatherstripping, and glass seal. If the frame is square and the rollers are the only problem, we’ll quote a repair. If the frame is warped, the glass has failed, or the window is single-pane, we’ll quote a replacement. Either way, you get a written price before any work starts.
- You approve the written quote. No surprises. The number on the paper is the number on the invoice. If the job changes mid-way because we find rot inside the wall or a twisted frame, we stop and get your sign-off before spending another dollar.
- We do the work. For a repair, it’s typically same-visit or next-day. For a replacement, we order the window if it’s not in stock, then schedule installation for a morning or early afternoon slot that works for you. Installation usually takes 60 to 90 minutes per window once the old unit is out.
- We test it in front of you. Before we leave, you slide the window open and closed. You lock it. We check the seal with a moisture meter and inspect the caulking line. If anything feels off, we fix it right then.
- You get a written guarantee. Every repair or installation comes with a documented warranty, and the whole job is covered by our 365-Day Done Right Promise. If something isn’t right within a year, we come back and make it right at no charge. If a repair fails, the second visit is free. Period.
Horizontal Roller Windows Pricing in Dallas
Let’s get specific, because you deserve to know what a window costs before you pick up the phone. Horizontal roller window pricing in Dallas breaks down into a few clear tiers:
| Scope of Work | Typical Dallas Price Range |
|---|---|
| Roller replacement (parts and labor, one sash) | $90 to $180 |
| Track cleaning, lubrication, and weatherstripping replacement | $110 to $210 |
| Glass replacement for a failed seal (insulated unit, standard low-E) | $260 to $480 |
| Full window replacement, vinyl frame, single slider, standard size (up to about 36″ x 60″) | $420 to $680 |
| Full window replacement, aluminum or thermally broken frame, single slider, standard size | $580 to $900 |
| Large or custom horizontal roller window with impact glass (ES Windows or ECO Window Systems, for example) | $850 to $1,500+ |
These are installed prices, not product-only numbers. They include labor, haul-away of the old window, caulking, and the written warranty. Here’s what moves the price in Dallas specifically:
- Glass package. Standard low-E glass (a thin coating that blocks heat while letting light through) adds $80 to $180 per window. Impact-rated glass, which matters if you live in a hail-prone stretch of Dallas or want the extra security, adds $200 to $500 depending on the product line.
- Frame material. Vinyl is the most affordable and common. Aluminum is stronger and slimmer, but without a thermal break it conducts heat, so a good aluminum slider costs more to do right. Mr-Glass offers some excellent aluminum slider profiles that we recommend for mid-century homes in Dallas where vinyl would look out of place.
- Size and mullion configuration. A three-panel slider with two moving sashes costs more than a two-panel. Wide openings over 72 inches require stronger frames and sometimes tempered glass, which adds to the bill.
- Condition of the existing opening. If the old window’s frame is rotted, the rough opening is out of square, or you have clay-soil foundation movement that’s shifted the opening, we have to correct that before the new window goes in. Expect $120 to $400 in prep work depending on the severity.
We give free estimates. There’s no charge to have a technician come out, measure, and hand you a written quote. If you’ve been putting off a horizontal roller window because you’re afraid of the number, call us instead of guessing. You’ll have a hard figure in writing within a day or two of the visit. Call (361) 203-9040.
Repair or Replace? How to Decide
The honest answer we give Dallas homeowners is this: if the frame is sound and the glass is clear, repair. If the frame is warped, the glass seal is dead, or the window is single-pane aluminum from the Reagan administration, replace. Here’s the rule of thumb we use: when a repair bill exceeds half the cost of a new window of equivalent size, replacement makes more financial sense. A roller replacement for $150 on a window that’s otherwise fine? Repair it. A $400 glass replacement on a 35-year-old frame that’s already sagging? Put that money toward a new window instead.
We’re glad to walk you through this on site. Our technicians aren’t paid commission, so the recommendation you get is based on what we’d do in our own homes, not on what pads a sales number.
Dallas Climate and Horizontal Roller Windows
Dallas weather tests windows harder than almost anywhere else in the country. We get 100-degree stretches from June through early September, sudden freeze events every few winters, and spring hail storms that can shred a window screen and crack a pane in seconds. Horizontal roller windows take all of it, and the design details matter.
In our summer heat, the sun beats directly on west- and south-facing windows from mid-afternoon until sunset. A low-E coating on those exposures is not optional; it’s the difference between a room that stays comfortable and one where the AC runs nonstop. For Dallas, we typically recommend a solar heat gain coefficient (SHGC) at or below 0.25 on west-facing horizontal rollers, with a U-factor around 0.30 or lower for the frame-and-glass assembly. That’s a technical way of saying: the window keeps the heat out in August and the warmth in during a February freeze.
Winter brings the other test. Dallas freezes are usually short but sharp, and horizontal roller windows with worn weatherstripping leak cold air at the interlock. The February 2021 freeze, when temperatures stayed below freezing for over 130 consecutive hours, exposed how many Dallas homes had inadequate window seals. If you felt cold radiating off your windows during that stretch, your horizontal rollers were part of the problem.
Spring hail is the third factor. Dallas sits in a hail corridor, and storms can produce stones large enough to crack single-pane glass and dent aluminum frames. Impact-rated horizontal roller windows, like those from ES Windows or ECO Window Systems, are engineered to withstand exactly that. They cost more up front, but in neighborhoods like Lakewood, East Dallas, and Richardson where hail claims are common, we see buyers recoup that difference through lower insurance premiums and avoided glass replacements.
Product Lines We Install for Horizontal Roller Windows
We don’t push one brand. We carry multiple professional-grade lines because a horizontal roller window in a 1950s ranch in Casa Linda needs a different product than a modern slider on a new build in Frisco. Here are the lines we reach for most often on this type of window:
ES Windows makes high-performance aluminum sliders with excellent thermal breaks and a clean, narrow sightline. We use ES Windows for larger horizontal roller openings where strength matters, and for clients who want impact-rated glass without a bulky frame. Their sliders are common in contemporary Dallas builds and remodels in areas like Bluffview and Devonshire.
ECO Window Systems produces impact-rated aluminum and vinyl windows that hold up exceptionally well under North Texas hail conditions. Their horizontal rollers are a strong choice when you want storm protection at a mid-range price point. We recommend ECO Window Systems often for homes east of Dallas in the Hwy 80 corridor, where storms seem to track every spring.
Mr-Glass is a Florida-based manufacturer whose horizontal rolling windows are engineered for high humidity and tropical storm conditions. That translates well to Dallas for one simple reason: their weatherstripping and interlock seals are designed to handle heavy rain and wind-driven water. We reach for Mr-Glass on horizontal rollers that face prevailing storm directions or sit under roof valleys with poor overhang protection.
We also install Therma-Tru for door products, but for horizontal roller windows specifically, the three lines above are what we quote most often. The right window depends on your opening, your exposure, and your budget, and we’ll tell you which line we’d choose and why.
Why Choose Us for Horizontal Roller Windows
We’re not a general contractor who does windows on the side. We’re not a big-box installer that subcontracts the work to whoever’s available that day. Hale Windows Dallas is a windows-and-doors specialist, independently owned and operated as part of the Threshold Group family of home-service brands since 2009.
Here’s what that means for you in concrete terms:
- You know who’s coming before they arrive. The Threshold Standard means every technician is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo. If you’re home alone, or you have young kids in the house, or you just don’t like opening the door to a stranger, this matters. It’s not a nicety; it’s the standard we built the company on.
- The price is in writing before any tool leaves the truck. You’ll never get a verbal quote followed by an invoice with extra line items. The written quote is the price. If we find something hidden, we stop and get your approval before spending your money.
- 365-Day Done Right Promise. One year. If it’s not done right, we make it right. This is a documented guarantee, not a marketing slogan. It’s stamped on every job, and we honor it.
- Written guarantee on every repair. If a repair fails within the warranty period, the second visit is free. You don’t pay us to fix our own mistake.
- A live person answers the phone, 24/7. No voicemail tree. No callback queue. You call, a person picks up. It sounds simple, but it’s rare in this industry, and most of our Dallas customers mention it in their first call.
Spencer Odell leads our Dallas operation, and he’s built the team here around one idea: if we tell you exactly what the window will cost, exactly who’s coming to your home, and exactly what happens if something goes wrong, you’ll call us the next time too. That’s the whole strategy.
FAQs – Horizontal Roller Windows
How much does it cost to replace a horizontal roller window in Dallas?
A full horizontal roller window replacement in Dallas typically costs $420 to $980 installed for standard sizes, with larger or impact-rated windows running $850 to $1,500 or more. The price depends on glass package, frame material, and the condition of the existing opening. We give free estimates, and the written quote you receive is the exact price you’ll pay. Call (361) 203-9040 to schedule a measurement.
Can you fix a horizontal roller window that’s hard to slide?
Yes, and it’s usually one of three things: worn roller assemblies, a dirty or bent track, or a misaligned sash. Roller replacement on a single sash runs $90 to $180 in Dallas, and we often clean and lubricate the track during the same visit. If the frame is warped or the glass seal has failed, a full replacement may make more sense, and we’ll tell you honestly which way to go. Call (361) 203-9040 and a live person will help you schedule a diagnosis.
Is it cheaper to repair or replace a horizontal roller window?
A repair is almost always cheaper in the short term: a $150 roller replacement beats a $600 full window replacement. But if the frame is warped, the glass seal is dead, or the window is a single-pane unit from before 1990, the repair money doesn’t solve the underlying problem. Our rule of thumb: when repair costs exceed half the price of a comparable new window, replacement is the smarter move. We’ll quote both options and let you decide with real numbers in hand.
Can you replace a horizontal roller window the same day?
Sometimes yes, if the window is a standard size we keep in stock. More often, the replacement sash or full unit needs to be ordered from ES Windows, Mr-Glass, or ECO Window Systems, which takes 5 to 14 business days in Dallas. Repairs like roller swaps or weatherstripping replacement can usually be done the same visit. If you need a quick fix, call (361) 203-9040 and we’ll tell you what’s possible based on your window’s size and condition.
Do horizontal roller windows seal well against Dallas heat and cold?
Modern horizontal roller windows with low-E glass and a good interlock seal perform well in Dallas weather, but an older slider with worn weatherstripping leaks air and drives up your energy bill. The weak point on any sliding window is the interlock where the sashes meet, so a quality installation with a tight seal there matters as much as the glass package. We test every installation for air leakage before we call it done.
Call Hale Windows Dallas for Horizontal Roller Windows
If you’ve got a horizontal roller window that’s sticking, leaking, fogging, or just older than you’d like to admit, call us. We’ll send a named, photo-badged technician to measure and diagnose, hand you a written price, and answer every question you’ve got. No pressure, no vague estimates. Call (361) 203-9040 now for a free estimate, or use our home page to learn more about how we work.
Written by Spencer Odell, Owner at Hale Windows Dallas, serving Dallas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.