New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
VLX 100 Swing / Entry Door in Dallas, TX | Hale Windows Dallas
The VLX 100 Swing / Entry Door is a modern aluminum entry system built around a clean, minimalist frame and a multi-point lock that engages along the full length of the door. Dallas homeowners choose it when they want a front door that reads as architecture, not just a barrier. As an authorized ViewLux installation partner, Hale Windows Dallas supplies and installs this door across the Dallas metro, backed by factory-trained crews and AAMA-standard workmanship. Call (361) 203-9040 to talk specs, pricing, and lead times with our team in Dallas.
Product Overview – VLX 100 Swing / Entry Door
The VLX 100 Swing / Entry Door from ViewLux is a single entry aluminum door with a profile width of 2.56 inches, giving it a slim sightline that maximizes glass area without sacrificing structural stiffness. The frame walls measure 0.098 inches thick, which is more than enough to hold a heavy insulated glass unit and keep the panel square over years of Dallas heat and humidity cycling.
We see this door specified most often in contemporary and mid-century remodels around Dallas, especially in neighborhoods like Lakewood, East Dallas, and Bluffview where homeowners are replacing dated steel or wood doors with something cleaner. It suits both modern builds and traditional homes that want a sharper front elevation. The door is a single entry configuration, meaning it hinges on one side and opens inward or outward depending on your rough opening and preference.
What sets it apart from economy doors sold at big-box stores in Dallas is the multi-point locking hardware. Instead of one deadbolt at the latch, the VLX 100 engages locks at three points along the frame when you lift the handle. That spreads the locking force across the full height of the door and makes forced entry considerably harder. It also pulls the panel tight against the weatherstripping, which directly improves the door’s airtightness performance.
Hale Windows Dallas carries this door because ViewLux builds to the standard that our Dallas clients expect: thermally broken aluminum, factory-finished surfaces that don’t require painting, and hardware that feels deliberate. We’re an authorized installation partner, so the door you buy through us is installed by crews who know this exact product rather than a generic crew learning on your house.
Technical Specifications
| Specification | VLX 100 Swing / Entry Door |
|---|---|
| Frame wall thickness | 0.098″ extruded aluminum |
| Profile width | 2.56″ |
| Maximum panel span | Up to 48″ wide |
| Glass options | Clear, Frosted, Obscure, Low-E, Tempered, Laminated |
| Finish options | Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood |
| Screen options | Retractable Screen, None |
| Locking | Multi-point locking hardware |
| Frame construction | Thermal break technology, NFRC-rated |
| Installation standard | AAMA 2400/2410, AAMA 812 perimeter sealant |
Performance Features
Thermal Efficiency: The VLX 100 uses a thermal break in the aluminum frame, separating the exterior and interior metal so Dallas summer heat doesn’t conduct straight through the door. Paired with Low-E glass, the NFRC-rated performance keeps your entry from becoming a radiant heater in July.
Acoustic Performance: Laminated glass is the right choice for Dallas homes near traffic corridors like Central Expressway, I-30, or the tollway. The interlayer in laminated glass cuts sound transmission noticeably, and the tight multi-point locking seal removes the gaps that let noise leak around the panel edges.
Airtightness & Weather Seal: Because the multi-point lock pulls the door panel snug against full-perimeter weatherstripping, the VLX 100 holds a strong air seal. That matters in Dallas where dusty winds and pollen seasons push against entry doors. A tight seal means less dust inside and steadier indoor temperatures.
Waterproofing: The door’s sill design channels water away from the threshold, and Hale Windows Dallas applies AAMA 812 low-expansion foam sealant on every perimeter joint during installation. That combination keeps wind-driven rain from working its way under the door, which we see as a common failure point on poorly installed doors in Dallas.
Wind Resistance: Dallas sits in a zone that sees strong straight-line winds and the occasional severe storm. The VLX 100 is wind-load rated for local climate requirements, and the 0.098-inch frame walls plus multi-point locking keep the panel from flexing under pressure.
Security & Hardware: The multi-point locking system is the standout here. Three lock points engage along the frame, which means a pry attempt at the top or bottom of the door doesn’t work the way it does on a single-latch door. It’s a significant step up in security for Dallas homeowners who travel or live on corner lots.
Color & Glass Options
The VLX 100 comes in six factory-applied finishes. Premium Black and Pure White suit the clean modern and transitional homes common in Dallas, while Anodized Silver and Bronze read more architectural and pair well with steel accents and stone facades. Champagne is a warmer metallic that works in traditional Dallas homes with brass or bronze hardware. Teak Wood is a wood-grain finish that gives you the look of stained wood with none of the maintenance, which appeals to homeowners in established Dallas neighborhoods who want character without annual refinishing.
On the glass side, Clear lets maximum light in and works for covered entries. Frosted and Obscure deliver privacy while still passing daylight through, which is useful for doors that face a street or a neighbor’s window. Low-E glass improves energy performance. Tempered glass meets safety glazing requirements for doors. Laminated glass is what we recommend for Dallas homes that want impact resistance and better sound control in one package.
Installation by Hale Windows Dallas in Dallas
An entry door is only as good as the opening it’s set into. In Dallas, we deal with slab foundations that shift, brick veneers that hold moisture, and summer storms that test every perimeter seal. That’s why we install the VLX 100 Swing / Entry Door to AAMA 2400/2410 standards, which govern proper installation of fenestration products.
Our process starts with a pre-install inspection of the rough opening. We check the subfloor and header, verify dimensions, and identify any rot or water damage that needs addressing before the door goes in. Once the opening is sound, we set the door level, plumb, and square, shimming as needed so the panel operates smoothly and the multi-point locks engage without binding. A door that’s out of square will fight its own hardware, and that’s where we see premature wear on doors installed by handyman crews around Dallas.
After the frame is fastened, we apply AAMA 812 low-expansion foam sealant along every perimeter joint. This is the detail that separates a door that stays dry for decades from one that leaks after the first storm season. We then run a final water test, adjust hardware, and clean the entire work area before we leave.
Here’s the thing most people don’t learn until it’s too late: an improperly installed door voids the manufacturer warranty. ViewLux warranties cover defects in materials and workmanship, not installation errors. When Hale Windows Dallas installs your VLX 100 in Dallas, the installation work is done by our own trained team, and we stand behind it.
Frequently Asked Questions – VLX 100 Swing / Entry Door
Lead time for the VLX 100 Swing / Entry Door in Dallas typically runs 4 to 6 weeks from order confirmation, depending on glass selection and finish availability. Custom finishes or laminated glass can add a week or two. Call (361) 203-9040 and we’ll confirm current lead times from ViewLux before you commit.
The VLX 100 may qualify for energy efficiency incentives when configured with Low-E glass and thermal break technology, but eligibility depends on the exact glass package and the credit program in effect for Dallas residents. We can provide the NFRC ratings for your specific configuration so your tax professional can verify eligibility before you file.
The VLX 100 carries a manufacturer warranty from ViewLux covering defects in materials and workmanship, and Hale Windows Dallas backs our installation work with our own workmanship warranty. Keep in mind that installation errors void the manufacturer warranty, which is exactly why professional installation through an authorized partner matters in Dallas.
The VLX 100 Swing / Entry Door handles panels up to 48 inches wide, and within that span ViewLux builds to your rough opening dimensions rather than forcing you into stock sizes. That means a custom-fit door without the custom price. Send us your opening measurements and we’ll price it exactly. Call (361) 203-9040 for a free measurement in Dallas.
Aluminum frames need very little maintenance. Wipe the frame and glass with mild soap and water twice a year, lubricate the locking mechanism and hinges annually with a dry silicone lubricant, and check the perimeter weatherstripping for compression. In Dallas, pollen and dust build up faster than you’d think, so a quick clean each spring and fall keeps the finish looking factory fresh.
Get a Quote – VLX 100 Swing / Entry Door in Dallas
The VLX 100 Swing / Entry Door is a serious upgrade for a Dallas entryway, and pricing depends on size, glass, and finish. Call Hale Windows Dallas at (361) 203-9040 to schedule a free on-site measurement and get a written, line-item quote. We’ll walk you through the options and start your project.
Written by the team at Hale Windows Dallas, authorized ViewLux installation partner serving Dallas, TX and surrounding neighborhoods.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows Dallas Services
What Neighbors Say About Hale Windows Dallas
Detailed Images
