VLX 80 Awning Window

VLX 80 Awning Window in Dallas, TX | Hale Windows Dallas

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, which means you get real ventilation even while it’s raining. That single feature makes it one of the most practical window styles for Dallas homeowners, where spring thunderstorms roll through weekly and summers punish sealed-up houses. Hale Windows Dallas is an authorized ViewLux installation partner, so when you buy a VLX 80 through us, you’re getting the manufacturer’s product installed by a team that trains on it specifically. Not a general contractor who’s “seen one before.” Call (361) 203-9040 to talk about your project or schedule a measurement.

Call (361) 203-9040

Product Overview – VLX 80 Awning Window

The VLX 80 is built around a simple idea: a window should let air in without letting weather in. The top-hinged design angles the sash outward and upward, creating a natural awning effect that sheds rain away from the opening. In Dallas, that’s a genuinely useful feature. We get more than our share of sideways rain in April and May, and an awning window lets you keep circulating air through the house without worrying about water puddling on the sill.

This series sits well in a lot of architectural contexts. We’ve installed VLX 80 units in mid-century modern homes in Lakewood, new builds in Frisco, and ranch-style homes across Richardson and Plano. The clean aluminum profile reads contemporary, but the right finish color can ground it in a more traditional facade. What really makes this window stand out is the engineering underneath: a slim 1.97-inch profile frame with a .079-inch wall thickness, which is substantial for an aluminum window. You get strength without bulk. The thermal break in the frame separates the interior and exterior aluminum surfaces, which is what keeps the frame from conducting Dallas heat straight into your living room.

Buyers choose the VLX 80 when they want a window that does more than look good in the showroom. It’s the window you put over the kitchen sink, in a bathroom that needs ventilation and privacy, or across a wall where you want stacked units that all open independently.

Technical Specifications

Here’s what the VLX 80 brings to the table, in plain terms.

• Frame construction: Aluminum with a thermal break, wall thickness of .079 inches.
• Profile width: 1.97 inches, a slim sightline that maximizes glass area.
• Glass options: Clear, Frosted, Low-E, Tempered, and Laminated. Mix and match depending on exposure and privacy needs.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
• Screen options: Fixed screen or retractable screen, depending on how much the window gets used.
• Performance: NFRC-rated energy performance, AAMA 2400/2410 installation compliance, AAMA 812 perimeter foam sealant on all joints.
• Hardware: Multi-point locking on the sash for a tight, secure close.

The operating hardware is all corrosion-resistant, which matters in North Texas. Humidity and heat are tough on cheap window components.

Performance Features

Thermal Efficiency

The thermal break between interior and exterior frame surfaces is not a marketing bullet point. It’s the difference between a window frame that feels like a radiator in August and one that stays close to room temperature. The VLX 80 carries NFRC-rated energy performance data for the Dallas climate zone, so you’ll know exactly what you’re getting before you buy.

Acoustic Performance

Aluminum has a reputation for being loud, but a quality awning window with a proper weather seal does good work cutting street noise. If you live near 75, the Tollway, or any of the rail lines that cut through Dallas, ask us about laminated glass. It adds a significant reduction in sound transmission.

Airtightness & Weather Seal

The compression seal around the sash is part of what makes this window efficient. When the sash closes and locks, it pulls tight against the weather stripping. No drafts around the edges, no dust sneaking in during a dry, windy March. That matters year-round in Dallas, not just during the hot months.

Waterproofing

The awning design naturally sheds water, but the real waterproofing happens at installation. Hale Windows Dallas applies AAMA 812 low-expansion foam sealant on every perimeter joint. That’s the standard that prevents air and water from finding a gap between the window and the rough opening. We don’t skip it. Ever.

Wind Resistance

Dallas gets serious wind. Not hurricane-level, but strong straight-line winds and the occasional tornado warning mean your windows need to hold. The VLX 80 is wind-load rated for local climate requirements, and the multi-point locking system keeps the sash from flexing under pressure.

Security & Hardware

Awning windows are small enough that break-ins through them are rare, but that doesn’t mean the hardware should be an afterthought. The VLX 80 uses a multi-point lock that seats the sash into the frame at multiple points, not just the handle. For ground-floor installations, we recommend laminated glass for impact resistance.

Color & Glass Options

The VLX 80 comes in six finishes, and they’re not all created equal depending on what you’re going for. Premium Black is the most requested finish in Dallas right now, especially on modern builds and renovations in East Dallas and Oak Cliff. It reads sharp against brick and stucco. Pure White is the safe choice for traditional homes and it also does well in bathrooms and kitchens where the window needs to disappear into trim. Anodized Silver is the architectural default: clean, metallic, honest. Bronze and Champagne both work with warmer exterior palettes, and Teak Wood gives you the look of a wood window with none of the rot or termite risk that comes with real wood in our climate.

Glass selection should follow the room, not just the budget. Low-E is the workhorse for Dallas because it cuts the heat gain that drives up cooling bills from April through October. Frosted glass is ideal for bathrooms and any window facing a neighbor’s wall. Tempered glass is code-required in certain locations like near doors or close to the floor. Laminated glass is your upgrade for security and sound. Hale Windows Dallas will walk you through what makes sense room by room.

Installation by Hale Windows Dallas in Dallas

We say this often, and we’ll keep saying it: the best window in the world will fail early if it’s installed poorly. Manufacturer warranties cover defects in the window, not defects in the installation. A window that’s not level, not plumb, or not square will bind, leak, and eventually refuse to close properly. The warranty won’t save you from that.

Our process starts with a pre-install inspection at your Dallas home. We check the rough opening, the framing condition, and any signs of water damage from the old window. If there’s a problem, we tell you before we tear anything out. Then we set the VLX 80 into the opening, shim it until it’s dead level, plumb, and square, and anchor it per the manufacturer’s spec. Every perimeter joint gets AAMA 812 low-expansion foam sealant. That step is non-negotiable: it seals against air and water infiltration and it allows the frame to expand and contract with Dallas temperature swings without compromising the seal. We install to AAMA 2400/2410 standards, which is the recognized industry benchmark for window installation. Final step is a water test on the exterior, then cleanup. We haul off the old windows and leave the area cleaner than we found it.

Dallas building code does require specific anchoring and flashing details depending on the wall construction: brick veneer, stucco, siding, or hardie. We pull the permits when required and we’ve never had an installation fail inspection.

Frequently Asked Questions – VLX 80 Awning Window

Get a Quote – VLX 80 Awning Window in Dallas

If you’re replacing windows in Dallas or building new, the VLX 80 is worth a close look. We’ll come out, measure, show you glass and finish samples in person, and put a written quote in your hand. No pressure, no games. Call Hale Windows Dallas at (361) 203-9040 to schedule your free on-site measurement and project estimate today.

Written by the team at Hale Windows Dallas, serving Dallas, TX and surrounding communities as an authorized ViewLux installation partner.