New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Replacement: The Dallas Owner’s Guide
If your ECO Window Systems window has failed, we stock compatible replacement sashes, glass units, balances, and hardware in our Dallas shop and typically complete a full window replacement for $450 to $1,100 per opening installed, depending on glass package and frame condition. Most ECO Window Systems replacements in Dallas are finished the same visit once we confirm the series and measurements. You’ll usually find out the hard way: a window that won’t stay up, a fogged pane, or a lock that finally gave out. Spencer Odell walks every finished ECO replacement before the crew loads up, and the price is in writing before we start.
Which ECO Window Systems Models This Applies To
ECO Window Systems built several series over the years, and the replacement path depends on which one you have. The most common lines we see in Dallas homes are the ECO 5000 and ECO 7000 single-hung and horizontal slider units, along with a smaller population of ECO casement and picture-window configurations. The model label is usually etched in the corner of the glass or stamped on the frame extrusion near the sash lock. If the label is gone, we measure the visible glass height and width, plus the frame depth, to identify the series. ECO’s older 5000-series sashes use a narrower balance channel than the 7000, and a 7000 sash will not drop into a 5000 frame without modification: that compatibility gotcha is one reason we measure twice before ordering or cutting anything.
On parts, we stock OEM ECO Window Systems replacement sashes and hardware when available, and quality aftermarket equivalents for discontinued series. The aftermarket balances and locks we carry for ECO units are sourced to match the original tolerances, and we’ll tell you plainly when an OEM part is worth the wait versus when the aftermarket option holds up just as well. Hale Windows & Doors is an independent service provider and not affiliated with ECO Window Systems, but we install and service ECO units alongside PGT, CGI, CWS, and the other professional lines we carry.
Signs Your ECO Window Systems Window Replacement Is Failing
- The sash won’t stay up. The block-and-tackle or spiral balances inside the frame have lost tension or snapped. In Dallas heat, the nylon components in these balances get brittle faster than coastal climates; it’s the most common ECO failure we replace.
- Fog between the panes. The insulated glass unit seal has failed. North Texas temperature swings, especially the 40-degree overnight drops in spring, flex the seal until it lets moisture in. Once fog appears, the glass unit needs replacement, not repair.
- Hard to lift or slide. Debris in the track or a bent balance shoe. Sometimes the frame has settled slightly out of square, common in slab-foundation Dallas homes, and the sash drags against the jamb.
- The lock won’t engage. The keeper and latch have worn or the sash alignment has drifted. A window that won’t lock is a security problem, not just a hardware annoyance.
- Drafts or visible daylight at the corners. Weatherstripping has compressed or the glass unit has shifted. You’ll feel it in January and pay for it in July.
Replacement Cost & What’s Included
In Dallas, a full ECO Window Systems window replacement with us runs $450 to $1,100 per opening installed. The range comes down to glass package: a standard clear insulated unit on a 5000-series sits at the lower end, while a low-E glass package (a thin coating that blocks heat while letting light through) on a 7000-series casement or a large picture window lands higher. Frame rot or a badly out-of-square opening adds to the labor if we need to correct the rough opening before the new unit seats properly.
Every quote is written before we start. That written price includes the replacement part or glass unit, installation labor, haul-away of the old unit, and a written guarantee on the work. If a replacement fails, the second visit is free. And every ECO replacement falls under the 365-Day Done Right Promise: if it’s not done right, we make it right, no argument needed.
DIY or Call Us?
Some things are worth checking yourself. Clean the tracks, confirm the model label, measure the visible glass so you can describe the unit accurately on the phone. But window replacement on an ECO unit is not a beginner’s job. The balances are under real tension, and a sash that releases unexpectedly can take a finger off or shatter glass onto your driveway. The insulated glass units also weigh more than people expect, especially the 7000-series triple-pane builds. If the frame is out of square, forcing a new sash into the channel will bind and you’ll be back to square one with a scratched frame. Call (361) 203-9040 and we’ll match the unit, set a written price, and do the swap without the drama.
FAQs
An ECO window in North Texas should give you 15 to 25 years on the frame, with the glass seal often failing between years 10 and 15 because of the temperature swings we get. Balances and locks typically need replacement once during that window. If your unit is under 10 years old and failed, call (361) 203-9040 for an exact diagnosis and a written quote.
Yes, if the frame is intact. A failed glass seal, worn balance, or broken lock can each be replaced without pulling the whole window. We stock common ECO replacement parts on the truck and will tell you honestly when repair is the cheaper path versus when the frame damage makes full replacement the smarter money. Call (361) 203-9040 and we’ll give you a straight answer with a written price either way.
A single sash or glass unit replacement usually runs 60 to 90 minutes once we’re on site. A full window replacement with frame work can take half a day. We’ll give you a realistic time window when we confirm the series and measurements, and the price for the job is in your hands before any work starts.
We keep common ECO balances, locks, weatherstripping, and sash hardware in our Dallas stock, and we can source OEM sashes and glass units quickly for most 5000 and 7000 series units. If the part is discontinued, we’ll offer a quality aftermarket equivalent and tell you the difference before you spend a dollar. Call (361) 203-9040 to check your model.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.