New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Door Installation: The Dallas Owner’s Guide
PGT door installation and replacement in Dallas typically runs $1,850 to $4,600 fully installed, depending on the model, glass package, and whether the frame needs rework. We stock PGT-compatible hardware, replacement weatherseal, and full door systems, and we can usually have the new unit in place within 5 to 10 business days once the door is ordered and confirmed for your opening. Homeowners usually discover they need this page after a Texas storm season, when the door begins binding, leaking at the header, or letting daylight through a sagging corner.
Hale Windows Dallas is an independent service provider, not affiliated with PGT. We install and service PGT doors because they hold up to Dallas heat and wind better than most doors on the market. Spencer Odell, our owner, keeps a running list of every unit we’ve installed across the Dallas – Fort Worth area, so when a PGT door from a previous job needs attention, we can pull the exact model history without anyone hunting down paperwork.
Which PGT Models This Applies To
Most of the PGT doors we install across Dallas fall into two families: the WinGuard and ClassicVue lines, but we also handle a fair number of PGT’s sliding glass door and French door units in older custom homes near White Rock Lake and Preston Hollow. The critical detail for any PGT door is the product label. You’ll find it on the edge of the door panel or the frame jamb. It will list the model series, glass type, impact rating, and the manufacturing date. Take a photo of that label before you call anyone. It tells us exactly which door you have and avoids ordering mistakes that can add a week to the job.
One compatibility gotcha specific to PGT: replacement doors must match the original glass package for both thermal and impact reasons. If you have a WinGuard door rated for windborne debris, swapping in a standard tempered unit means the entire assembly loses its Miami-Dade or Texas windstorm compliance. That affects not just safety, but whether your insurance carrier will renew the policy after a claim. We always verify that before quoting. OEM versus aftermarket matters more on PGT than on many brands because the impact-rated glazing is engineered to flex within the frame system. We default to OEM components for anything storm-rated, and we will say so plainly when that adds cost. For weatherseal, rollers, and handles, quality aftermarket parts are perfectly fine, and we stock them on the truck.
Signs Your PGT Door Installation Is Failing
- Daylight visible at the corners or along the latch side. This means the door panel has settled or the frame was never shimmed correctly. The air seal is gone, and in Dallas summers, that air leak becomes a utility bill you can watch climb.
- The door drags or binds when you try to close it. On a PGT impact door, the panel is heavy. Misaligned rollers or tired hinge screws will make the door fight you. If you have to lift the handle to get the latch to line up, the panel has sagged.
- Condensation between the glass layers. That is a failed seal. Once the sealed unit fogs inside, the insulating gas is gone. You cannot wipe it away, and the only correct fix is a new glass pack, not a new door, unless the frame is also compromised.
- Rattling or echoing in heavy wind. A PGT storm-rated door that rattles during a North Texas thunderstorm has lost its compression seal or the strike plate is no longer holding the panel tight against the weatherstripping. This is not normal, and it is not how the door behaved when new.
- Harder to lock, or the deadbolt no longer lines up. This usually follows frame movement or door sag. Forcing the deadbolt will wear out the lock body, and then the repair bill doubles. It also means the door is not sealing properly against the jambs.
Replacement Cost & What’s Included
Here is what PGT door installation costs in Dallas, based on the work we have done from Oak Cliff bungalows to newer homes throughout the metroplex. These are real installed ranges, parts and labor included.
| Scope of Work | Typical Installed Price |
|---|---|
| Weatherseal and roller replacement on an existing PGT slider | $240 – $520 |
| Glass pack replacement in a PGT door (sealed unit only) | $650 – $1,400 |
| Full PGT sliding glass door replacement, standard or low-E | $1,850 – $3,400 |
| Full PGT French door replacement, double panel | $2,600 – $4,600 |
| PGT WinGuard impact-rated door replacement | $3,200 – $5,800 |
What drives the range: door size, glass package, whether the existing frame is square and reusable, and whether the job requires stucco or brick repair around the opening. Every estimate from Hale Windows Dallas is written and detailed before any work is scheduled. You’ll have the price in your hands before you make any decision. Every door install is covered by our 365-Day Done Right Promise. If it is not right, we make it right, no argument needed.
DIY or Call Us?
There are a few things you can safely check yourself before you call. Look at the label on the door edge and take a photo. Check the screws in the hinges and the top track for visible looseness. If the door is dragging, clean out the bottom track. That is the extent of what I would tell a homeowner to attempt on their own. What looks like a simple roller change on a PGT impact door often turns into a 200-pound panel that needs to be lifted out without bending the frame. Getting that wrong is how you end up with a door that never seals again, and a much bigger bill than the service call would have been.
If the door is fogged, hard-locking, or leaking air, that is not a maintenance issue. That is a repair that needs to be measured and matched to your existing PGT glass package. Call us at (361) 203-9040 and we will walk you through what you are looking at and get you a written price.
FAQs
A properly installed PGT door in Dallas will last 20 to 30 years for the frame with glass seals typically lasting 10 to 18 years before fogging appears. The North Texas heat cycle is what eventually breaks down the sealant. That is not a PGT weakness. Every sealed unit in Dallas faces the same thing. If your PGT door is approaching year fifteen and you are seeing condensation, call (361) 203-9040 to discuss replacement glass.
Yes, in most cases, the repair is far cheaper than replacement. If the hardware is worn or the weatherseal is crushed, those are straightforward fixes we can do on the same visit. If the glass is fogged, the sealed unit gets swapped, not the whole door. Full replacement only makes sense when the frame is soft, rot has taken hold, or the door is so old that replacement parts are no longer manufactured. We will always show you the lower-cost repair option when one actually exists.
A glass pack replacement takes about two hours on site. A full PGT door replacement, where we pull the old frame and set the new one, is usually a one-day install for a standard opening. Custom sizes or brickwork repair can extend it to two days. We will tell you when you get the estimate, in writing.
We stock PGT-compatible rollers, weatherseal, handle sets, and strike plates on the truck. For model-specific glass packs and full door panels, we order to your exact label specs, which keeps the lead time honest rather than guessing in your driveway. The label photo you send us is the single most useful thing you can provide before calling.
If your PGT door is failing and you want a straight answer, a written price, and a crew that shows up with names and photos before the truck arrives, call (361) 203-9040 today. Estimates are free, and the price is in your hands before any work starts.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.