New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Installation: The Dallas Owner’s Guide
If you have a PGT window that needs professional installation in Dallas, the installed cost typically runs $75 to $145 per window for a standard sash or balance replacement, $225 to $475 for a full sash assembly swap, and $600 to $1,400 when the entire window unit has to come out. We stock PGT-specific parts on our trucks and can usually complete an installation the same day we arrive. Most Dallas homeowners call us after a window won’t stay open, a sash drops hard when released, or a crank handle strips out and spins without moving the vent. The good news: a failed PGT part rarely means replacing the whole window.
Which PGT Models This Applies To
Our Dallas installation work covers the PGT lines you’re most likely to have in a North Texas home: the 700 Series, 770 Series, 1200 Series, and Eze-Breeze sliding panels on patios and porches. PGT also makes impact-rated WinGuard windows, which we see more often in storm-conscious new construction around Dallas, and if you have those, the hardware and balances are different from the standard lines so matching the right part matters. Here’s the gotcha we run into weekly: two PGT windows can look identical from the living room but take different spiral balances because one is a heavier laminated glass unit and the other is standard annealed. The way to identify yours is the label on the frame or sash. It’s a white or silver sticker with the PGT logo and a string of numbers. If the label is gone, one of our techs can measure the sash and spring to get the match right. We use genuine PGT parts when they’re available. For some balances created by Caldwell or Amesbury under PGT’s specs, a quality aftermarket equivalent is the right call, and we’ll tell you which is which and what it costs before we start.
Signs Your PGT Window Installation Is Failing
- Sash won’t stay up. The spiral or block-and-tackle balance inside the frame has lost tension. This is the most common PGT failure we see in Dallas, and it’s almost always repairable without pulling the window.
- Window drops hard when you release it. The balance has snapped entirely, and the sash is now dead weight. A hard drop can crack the glass or bend the frame corners, so don’t force it back up.
- Crank turns but window barely moves. On PGT casement and awning windows, the operator gear teeth strip over time, especially with the fine dust that blows through older Dallas neighborhoods like Lakewood or Casa View. Replacement operators are stocked on our trucks.
- Window drags or binds in the track. Dirt, worn rollers, or a slightly warped vinyl frame. We clean the track first, then inspect the roller housing before recommending any part replacement.
- Condensation between the glass panes. This means the insulated glass seal has failed, which is a separate job from hardware. We replace PGT insulated units in Dallas and can match the low-E coating so the new unit blends with the rest of the house.
Replacement Cost & What’s Included
Here’s what Dallas homeowners can expect to pay for PGT window installation through Hale Windows Dallas:
- Spiral balance replacement: $75 to $145 per window, installed, including the part and adjustment.
- Casement operator replacement: $95 to $185 per window, installed, depending on the operator style and whether the hinge is reused.
- Full sash replacement: $225 to $475 per sash, installed, which covers the frame, glass, and hardware as one unit.
- Complete window unit replacement: $600 to $1,400 per opening, installed, including removal, new PGT window, flashing, and trim finish.
Every quote is a written, line-item price you get before work starts. You’ll know the exact cost of the part and the exact cost of labor. No change orders, no surprise fees at the end. And every installation is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right. Spencer Odell walks every finished PGT job before the crew packs up, because a window that opens wrong or seals wrong is a warranty call waiting to happen, and he’d rather catch it than apologize for it later.
DIY or Call Us?
You can safely inspect your PGT window without tools: check if both sides of the sash stay level, see if the tilt latches engage, and look for visible cracks in the frame. What you shouldn’t do is try to replace a spiral balance yourself. Those balances hold tension, and when a homeowner unwinds one incorrectly, it can snap back with enough force to take off a finger. The same goes for impact-rated WinGuard hardware on second-story windows. A trained tech can do most PGT window installations in Dallas in 30 to 90 minutes per window, depending on what failed and whether the window is accessible from inside. If you’re not sure whether your problem is a five-dollar part or a full-frame replacement, call (361) 203-9040 and describe what you’re seeing. We’ll tell you straight whether it’s worth a service call and what you’re probably looking at for cost.
FAQs
PGT window balances typically last 8 to 15 years in Dallas, with the intense summer heat and dry air pushing them toward the lower end. Constant exposure to direct sun on the south and west sides of a house degrades the internal lubricant and spring tension faster than shaded windows. Most Dallas homes built in the 2005 to 2015 boom are now hitting that replacement window, so if your house is that age and a balance fails, expect the others to follow within a year or two. Call (361) 203-9040 for a quote on replacing multiple balances at once, which saves on trip charges.
Yes, in most cases a failing PGT window can be repaired by replacing the balance, operator, roller, or weatherstripping rather than the entire unit. We only recommend full replacement when the frame is cracked, the glass seal has failed, or the cost of repairing multiple components exceeds 60% of a new window’s price. Hale Windows Dallas gives you the repair option first, with the number spelled out, because we’d rather fix what’s fixable than sell you a window you don’t need.
A straightforward PGT part replacement takes 30 to 90 minutes per window in Dallas, and we can typically handle multiple windows in a single visit. A full unit replacement runs 2 to 3 hours per opening, including removal, flashing, installation, and interior trim. For exact scheduling, call (361) 203-9040 and we’ll give you a realistic window for your job.
Yes, our technicians stock the most common PGT balances, operators, locks, and weatherstripping for the 700, 770, and 1200 series on the truck, so most Dallas calls are done in one visit. For less common parts, like WinGuard impact hardware or custom-sized Eze-Breeze panels, we order directly and typically have them within 3 to 5 business days. We service CGI, CWS, and ES Windows hardware the same way, so if you have a mixed window house, one call covers it.
If you have a PGT window that’s fighting you every time you open or close it, call Hale Windows Dallas at (361) 203-9040 for a free estimate. You’ll get a written price before any work starts, a name and photo of the technician before they arrive, and a 365-Day Done Right Promise on every installation.
Written by Spencer Odell, Owner, Hale Windows Dallas at Hale Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.