New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Dallas, TX | Hale Windows Dallas
We provide independent Mr-Glass window and door service across Dallas, from single-sash repairs to full-frame replacements. The thing that sets our Mr-Glass work apart here is simple: we know how Dallas heat, hail, and HOA rules punish these specific frames, and we fix them accordingly. Call (361) 203-9040 for a free estimate. We’re Mr-Glass sales & service specialists who work on these units every week.
Why Dallas Residents Choose Us for Mr-Glass Service
Mr-Glass windows have a particular feel and fit. The extrusions, the balance systems, the glazing beads – they are not interchangeable with every other aluminum window on the market, and a tech who treats them that way will leave you with a sash that binds or a seal that fails in August. Our crew has handled Mr-Glass 7000, 8000, 9000, and ImpactGuard units in Dallas homes for years. Spencer Odell, our owner, learned the trade at Los Angeles Trade-Technical College and has been performing Window Replacement - Dallas and entry door work across the Dallas-Fort Worth area long enough to keep a running list of every unit he has installed. That matters when you call about a fogged double hung three years later and want to know exactly what we put in.
We are independent Mr-Glass service providers, not authorized by Mr-Glass, and we say that plainly because you deserve to know who is working on your house. What we do have is deep familiarity with the product line, OEM parts where they matter, and a written price in your hands before any work starts. Every repair carries a written guarantee. If the repair fails, the second visit is free.
Common Mr-Glass Windows & Doors Problems We Solve in Dallas
- Pitted and warped single-pane aluminum frames. Original Mr-Glass frames in East Dallas neighborhoods like Lakewood and Casa View have spent 40 years under Texas UV. The aluminum pits, the frames warp, and the sash stops sealing. We replace balances, glazing beads, and weatherstripping, or refit the opening with a new Mr-Glass-compatible sash.
- Brittle glazing beads on 8000 Series double hungs. Dallas heat bakes plastic glazing beads until they crack the moment you try to remove a sash for cleaning. We replace them with UV-stabilized aftermarket beads that hold up far longer than the originals.
- Jumping sashes on 9000 Series horizontal rollers. Spring storm winds and hail debris clog roller tracks, and the sash jumps off track. We clean the track, replace damaged rollers with OEM or upgraded aftermarket parts, and set the sash to ride true.
- Fogged ImpactGuard units after hail strikes. In Collin and Denton counties where hail claims run highest, ImpactGuard Series windows can develop seal failure around the impact laminate. Repeated hail hits crack the seal, moisture gets in, and the glass fogs between panes. We replace the insulated glass unit with a proper impact-rated match.
- HOA-driven bronze finish matching. In Northeast Dallas, many HOAs require windows to match the original bronze aluminum finish. We retrofit new Mr-Glass sashes into existing frames, preserving the look while restoring function. This is a real workaround our crew does regularly in Lake Highlands and White Rock Valley.
Mr-Glass Service in Dallas: What Local Conditions Mean for Your Equipment
Here is the thing most window companies will not tell you about Dallas. In Northeast Dallas, homeowner associations in areas like Lake Highlands and White Rock Valley often require Mr-Glass windows to match the original bronze aluminum finish. A full replacement with a white vinyl window, even a good one, gets denied. So our crew specializes in retrofitting new Mr-Glass sashes into the existing frames. You keep the original exterior finish, the HOA sees no change, and you get a functioning window without a six-week approval fight. We pulled up to a 1980s ranch on Ferndale Road in Lake Highlands where the homeowner’s Mr-Glass 7000 Series single hung windows had frames pitted so badly the sashes would not stay up without a stick. Our tech swapped in new OEM balances, replaced the glazing beads with UV-stabilized aftermarket versions, and sealed the frame with a low-E insert. The afternoon heat gain dropped enough that the AC cycled off by 4 p.m. instead of running until midnight. That is the kind of fix that actually changes a Dallas summer.
Service Areas Near Dallas
We run Mr-Glass service calls across the Dallas metro: Plano, Richardson, Far North Dallas, Carrollton, and Farmers Branch. If your Mr-Glass windows are in any of those spots, see Mr-Glass service in Plano or Mr-Glass service in Richardson for local detail, or check our Dallas service area page.
Mr-Glass Models & Products We Service in Dallas
We service the Mr-Glass 7000 Series Single Hung, 8000 Series Double Hung, 9000 Series Horizontal Roller, and ImpactGuard Series. For impact-rated sashes and balances, we use OEM Mr-Glass parts whenever possible because aftermarket rollers and weatherstripping often do not match the original hardware tolerances. For older Mr-Glass models no longer in production, we source quality aftermarket parts that meet or exceed the original specs. We stock common Dallas failure parts locally: balances for 7000 and 8000 series, roller assemblies for 9000 sliders, and UV-stabilized glazing beads. That means faster turnaround when a window is stuck open in July.
Mr-Glass Service Pricing in Dallas
Dallas Window Repair for Mr-Glass units typically runs $150 to $450 per window depending on the failure. Balance replacement runs $85 to $180. Glazing bead replacement runs $60 to $120 per sash. Roller assembly replacement on a 9000 Series slider runs $120 to $250. Fogged ImpactGuard glass replacement runs $400 to $900 per unit because impact-rated insulated glass costs more and must match the original laminate spec. Full frame replacement of a Mr-Glass window in Dallas runs $700 to $1,500 per opening depending on size, glass package, and whether we are retrofitting into an existing HOA-approved opening. Every estimate is free, and the price we write down is the price you pay. No change orders mid-job. Call (361) 203-9040 to schedule your free estimate.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Dallas
Yes. We replace the insulated glass unit with a matching impact-rated IG, then re-seal and re-test the frame for proper fit. In Dallas hail country, a fogged impact unit is usually a seal failure around the laminate from repeated strikes, and the fix is a new glass unit, not a new frame. Call (361) 203-9040 for an exact quote.
Yes. We retrofit new Mr-Glass sashes into your existing bronze frames so the exterior finish stays identical. This is the standard workaround our crew uses in Lake Highlands and White Rock Valley, where HOAs enforce original finish matching. No full HOA architectural review needed in most cases.
The fix is usually a combination of track cleaning, roller replacement, and sometimes a track realignment. Dallas spring storms blow dust and hail debris into 9000 Series roller tracks, and worn rollers then bind and jump. We replace the rollers with OEM or upgraded aftermarket parts and set the door to ride correctly. Estimates are free: call (361) 203-9040.
In many cases, yes. We can add impact-rated laminated glass into existing Mr-Glass frames, reinforce the frame corners, and upgrade the hardware to meet higher wind pressure ratings. This works for many 7000 and 8000 Series windows. If the frame itself is too far gone, we will tell you honestly and give you a repair-vs-replace number before you spend a dollar.
Heat expansion exposes a seal failure that is invisible in mild weather. The seal between the glass panes fails, and the hot Dallas sun heats the trapped air, which then condenses when the AC cools the room side. The fix is replacing the insulated glass unit. Call (361) 203-9040 for a free estimate.
Book Your Mr-Glass Service in Dallas Today
If you have a Mr-Glass window that will not stay up, a slider that jumps track in every storm, or fogged impact glass after hail season, call (361) 203-9040 and talk to a live person. We will schedule your free estimate, send you the technician’s name and photo before the visit, and put the price in writing before any work starts. If I would not put it in my own house, I am not putting it in yours.
Written by Spencer Odell, Owner at Hale Windows Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.