New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Custom Window & Door Order Cost in Dallas?
A custom window and door order in Dallas typically runs $850 to $3,400 per opening for mid-range product and installation, with full-home projects of 8 to 12 openings landing between $9,000 and $38,000 in 2026. Entry-level builder-grade replacements sit near the bottom of that range, while impact-rated or architecturally matched products (common in Preston Hollow, Highland Park, and Lakewood) push toward the top. The written quote you receive before any work starts is the number that matters, and Hale Windows Dallas puts that price in your hands before anyone picks up a tool.
Custom Window & Door Order Cost Breakdown (2026)
Dallas pricing splits into two broad categories: the product itself and the labor to install it. Window and door packages from professional-grade lines like PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux carry different price points depending on material, glass package, and whether the unit is impact-rated. Here’s what homeowners across Dallas County and Collin County are seeing in 2026.
| Line Item | Typical Dallas Range | Notes |
|---|---|---|
| Vinyl window (standard size, single-hung) | $450 – $900 installed | Most common entry point; white vinyl, single-pane upgrade to low-E glass |
| Vinyl window (double-hung, low-E, argon) | $700 – $1,300 installed | Best value for Texas heat; blocks UV while letting light through |
| Impact-rated window (PGT or CGI, single-hung) | $950 – $1,900 installed | Common in North Dallas and storm-aware neighborhoods; code-driven in some areas |
| Impact-rated window (picture or casement) | $1,300 – $2,700 installed | Larger glass area, heavier frame, stronger install requirements |
| Aluminum or steel-frame window (architectural) | $1,800 – $4,200 installed | For mid-century or modern homes in East Dallas, M Streets, and Casa Linda |
| Entry door (fiberglass, pre-hung, standard 36×80) | $1,600 – $3,800 installed | Therma-Tru is the go-to line here; includes frame, threshold, hardware prep |
| Entry door (wood, custom stain or paint) | $2,400 – $5,500 installed | Wood species, grain matching, and finish work drive this up |
| Patio door (sliding, vinyl or aluminum) | $1,200 – $2,600 installed | Small 5-foot to 6-foot sliders sit at the low end; 8-foot+ goes high |
| Patio door (French, inswing or outswing) | $2,000 – $4,800 installed | Two active panels, more hardware, more air sealing |
| Full-home package (10 windows, 1 front door, 1 patio door) | $11,000 – $28,000 installed | Typical for a 1,800 to 2,500 sq ft Dallas home built 1960-1990 |
Those are installed numbers, not just product costs. Installation alone runs $150 to $400 per opening depending on interior trim work, exterior flashing, and whether the existing frame needs excavation or repair. Dallas homes built before 1980 often have aluminum single-pane frames with wood bucking that has to be pulled and rebuilt, which adds $100 to $300 per opening. Homes in the Park Cities with custom molding profiles or historical district requirements can see add-on costs of 15 to 30 percent for millwork matching.
The product itself is typically 55 to 70 percent of the total job. What moves the needle more than anything is the glass package. Low-E glass (a thin metallic coating that blocks heat while letting light through) adds $40 to $90 per window over clear glass. Argon gas fills add $30 to $60. Impact-rated glass, which is code-required in some Dallas neighborhoods near tornado corridors and common in homes where insurance carriers require it, adds $200 to $500 per opening over non-impact glass of the same size.
What Affects Custom Window & Door Order Pricing in Dallas
Two identical-looking houses on the same street in Lake Highlands can produce quotes that differ by several thousand dollars. Here’s what’s actually driving the spread.
- Frame material and glass package. Vinyl is the workhorse in Dallas and the least expensive. Fiberglass costs 25 to 40 percent more. Aluminum and steel, popular in architect-designed East Dallas homes, run 50 to 100 percent more than vinyl and require more precise install work.
- Impact-rating requirements. If your home is in a wind-borne debris zone, or if your insurance company is asking for a wind mitigation discount, impact-rated windows from PGT or CGI are effectively non-negotiable. That’s an automatic $400 to $700 per opening over standard glass, and skipping it can cost you far more on your policy.
- Opening size and shape. A standard 36-inch by 60-inch window comes off the line. An 84-inch picture window or an arched transom over a front door is a custom order with custom lead time. Arched, radius, octagonal, and oversized windows in Preston Hollow and Lake Forest routinely add $500 to $1,500 per opening compared to a standard rectangle of the same square footage.
- Age and condition of the home. Frame rot, termite damage, out-of-square rough openings, or plaster walls (common in older Dallas neighborhoods like Kessler Park and Winnetka Heights) all require more labor. We regularly see spring failures and water intrusion behind wall cladding that adds $150 to $400 per opening before the new window even goes in.
- Interior and exterior trim work. If you want the new window to look like it belongs, someone has to cut, cope, and install trim. Matching historical casing profiles in conservation districts adds real money. Basic white vinyl trim from a big-box store does not match a 1920s Munger Place bungalow, and the difference shows.
- Permit and code requirements. Dallas requires a permit for window and door replacement, and some suburbs like Richardson, Plano, and Garland have their own add-on inspection requirements. Permit fees are modest (typically $100 to $350), but inspection scheduling and code-mandated paperwork are part of every professional quote in this market.
Custom vs. Stock: What the Order Actually Looks Like
When you order a custom window or door in Dallas, you’re not picking a stock unit off a shelf at a supply yard and hoping it fits. You’re specifying frame material, glass type, gas fill, Low-E coating, grid pattern, hardware finish, exterior color, interior color, and screen type. The order goes to manufacturers like CWS, ES Windows, or ECO Window Systems and gets built to your measurements.
Lead times in 2026 run 3 to 8 weeks for vinyl, 6 to 12 weeks for fiberglass, and 10 to 16 weeks for impact-rated or architectural lines. Some high-volume lines from PGT and Therma-Tru keep standard sizes in regional stock for faster turnaround. The honest answer on timing: plan for 6 weeks from signed quote to install day on an average Dallas custom order, and know that a written price protects you while you wait. That price should not change between signature and install.
A custom front door from Therma-Tru typically runs $2,000 to $5,500 installed in Dallas, depending on glass lites, sidelites, and transom work. Homeowners in Inwood Road and Devonshire neighborhoods regularly pair a solid wood custom door with sidelites and a matching transom, and that combination runs $4,500 to $8,000 as a package. It’s a significant chunk of a renovation budget, and it’s also the first thing anyone sees from the curb.
How to Save on Custom Window & Door Order
The biggest mistake Dallas homeowners make is buying the cheapest product and then paying twice as much later on install corrections, leak remediation, or early failure. Savings come from smart scoping, not cut-rate product.
- Bundle the project. Replacing 10 windows at once costs less per opening than doing two now and three in the spring. Mobilization, trash disposal, and trim setup are fixed costs that spread thinner across a bigger order.
- Choose standard sizes where they work. If a rough opening can accept a stock 36×60 size without significant framing changes, you’ll save $200 to $500 per window compared to a custom dimension. Sometimes the standard size is the upgrade.
- Skip the grids where they don’t matter. Simulated divided lites (grids) add $60 to $120 per window for a look that some Dallas neighborhoods expect and others don’t. If you’re in a more contemporary area, clean glass looks right and costs less.
- Buy the right glass for the exposure. Not every window in a Dallas home needs impact glass. North-facing windows get minimal direct sun and no storm exposure, so a low-E package without impact rating may be the right call. We’ll price it both ways so you can decide.
- Get a written quote and lock it in. This is the Hale approach and it’s also just good practice. A written price before any work starts means you’re not chasing numbers later. Call (361) 203-9040 for a free estimate on your Dallas window and door order.
For a deeper look at how the ordering process works, start with our Custom Window & Door Order in Dallas page, then come back here when you’re ready to talk numbers. And if you’re still deciding whether replacing beats repairing, we have straightforward guidance on our home page with links to window repair and replacement cost details.
FAQs – Custom Window & Door Order Cost
How much does custom window and door order cost in Dallas?
Expect to pay $850 to $3,400 per opening for most custom window and door work in Dallas in 2026. A full-home project of 10 to 12 openings typically lands between $9,000 and $38,000, with material, glass package, and impact-rating driving most of the spread. Call (361) 203-9040 and we’ll put a written price in your hands before any work begins – estimates are free.
Is it cheaper to repair window and door frames or replace them completely?
Frame repair in Dallas runs $150 to $450 per opening, while a full replacement runs $850 to $3,400. If the frame itself is rotted, out of square, or leaking air and water, repair is usually a short-term patch on a long-term problem. For most Dallas homes built before 1990, replacement is the better investment, and a written quote will show you the math side by side.
How much does it cost to replace a front door in Dallas?
A new fiberglass entry door from Therma-Tru runs $1,600 to $3,800 installed in Dallas, and a custom wood door with sidelites runs $2,400 to $8,000 depending on species, glass, and hardware. Front door replacement is one of the highest-value projects you can do for curb appeal in a Dallas neighborhood, and the Threshold Standard means the technician who shows up is background-checked, identity-verified, and pre-announced by name and photo before the visit.
How much does impact glass cost in Dallas?
Impact-rated windows from PGT or CGI add $400 to $700 per opening over standard low-E glass in the Dallas market. The cost varies by size and frame type, but for a typical 36×60 window you’re looking at $950 to $1,900 installed for impact glass versus $450 to $900 for standard glass. If your insurance carrier offers a wind-mitigation credit, the premium often pays for itself within 3 to 5 years.
Can you install custom windows and doors the same day?
No. Custom window and door orders are built to your measurements and lead times run 3 to 16 weeks in Dallas depending on brand and product line. Stock sizes from PGT and Therma-Tru can sometimes be installed in 1 to 2 weeks. What we can do is put the price in writing today, so when the product arrives, the number hasn’t moved. Call (361) 203-9040 anytime – a live person answers, 24 hours a day.
Does Hale Windows Dallas charge for estimates?
No. Estimates are free, and every quote is delivered as a written price before any work starts. That’s been the standard at Hale since 2009, and it’s backed by the 365-Day Done Right Promise: if the work isn’t right, we make it right. No argument needed.
Written by Spencer Odell, Owner at Hale Windows Dallas. Mr. Odell has been serving the Dallas market since 2009, leading a team that installs and services PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux product lines. Pricing reflects the Dallas market as of 2026. Hale Windows Dallas offers free estimates – call (361) 203-9040.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows Dallas Services
What Neighbors Say About Hale Windows Dallas
What Our Customers Say
"Honest quote with the glass type and U-factor spelled out. Didn't need the triple pane and he told me so."
- Diane O."Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."
- Hank V."Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."
- Barbara N.