New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Lakewood
Window replacement in Lakewood typically runs $850 – $2,400 per opening for full-frame work and $500 – $1,400 for inserts, depending on whether we’re matching a 1930s masonry opening or working with newer construction. For a neighborhood where so many homes date from the 1920s through the 1950s, the job usually involves custom sizing rather than off-the-shelf units. Our crews know Lakewood’s conservation district rules, the clay soil that shifts foundations along Williamson Road and Lakewood Boulevard, and which window lines hold up best in the blast of a Texas summer. If you’re weighing a repair against a replacement, call (361) 203-9040 for a written price before you commit to anything.
Why Hale Windows Dallas Is Lakewood’s Preferred Window Replacement Company
Founded in 2009 and led by Spencer Odell, Hale Windows Dallas has spent years working on the kind of homes that define Lakewood: brick cottages with original steel casements, stone ranches with single-pane wood windows, and the occasional mid-century build along the tree-lined streets that make this neighborhood what it is. Homeowners here care about getting it right, not just getting it done. We’ve built our reputation in Lakewood on the jobs where a stock replacement wasn’t an option.
Every Lakewood job starts with the same two promises, and they’re written down before anyone touches your home. First, you get a line-item price in writing. Second, every repair carries a written guarantee, and if a repair fails, the second visit is free. The 365-Day Done Right Promise backs the entire job: if it’s not right, we make it right, no argument needed.
For homeowners who are often home alone, parents with young children, or older residents who don’t like opening the door to a stranger, the Window Replacement team we send follows the Threshold Standard. Every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You’ll know exactly who is walking up your front path before they ring the bell. When you call (361) 203-9040, a real person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue.
Window Glass Repair in Lakewood
Window glass repair in Lakewood usually means one of three things: a shattered pane from a storm or a stray rock from a mower, a fogged sealed unit with condensation trapped between the panes, or cracked glass around a shrinking wooden sash. In 1920s brick cottages along Lakewood Boulevard and in the Lakewood East conservation district, we regularly match the original glass thickness and edge profile so the repair doesn’t look like an obvious patch. A single-pane glass replacement in Lakewood typically runs $150 – $350 per pane, while replacing a fogged double-pane insulated unit runs $250 – $700 depending on size and whether the sash is wood or metal.
Sealed Unit Replacement For Fogged Glass
Fogged glass means the seal between two panes has failed and moisture is now living between the layers. That’s a sealed unit replacement, not a clean-and-repair. We measure the existing unit, order a matching low-E replacement (a thin coating that blocks heat while letting light through), and set it into the original sash. Most Lakewood homes with 1980s or 1990s double-pane aluminum windows are in this situation now.
Storm Damage Call-Outs
After the storms that roll through Dallas and into Lakewood, we field calls for broken panes, cracked sashes, and frames knocked out of square by wind. In older homes with original wood windows, the real risk isn’t just the broken glass; it’s the water that gets into the jamb while the pane is out. We board and seal the opening same call when we can, then schedule the glass work right after.
Window Pane Replacement in Lakewood
Window pane replacement in Lakewood means replacing just the glass and glazing, not the frame or sash. That matters in a neighborhood where preservation guidelines restrict exterior alterations on many pre-1950 brick and stone homes. If a pane cracks, chips, or loses its seal, we repair it in place, matching the original sight lines and putty glazing where the house calls for it. A single pane replacement in a wood sash window in Lakewood runs $150 – $350; a full sash with new pane, new glazing, and a refinished exterior surface runs $400 – $900 depending on the window’s size and how much of the original glazing survives.
Matching Original Sight Lines in Conservation District Homes
On older Lakewood homes with original wood windows, the glass profile matters. We use new glass of the same thickness as the original and re-putty by hand rather than caulking over it. This keeps the exterior looking the way it did in 1935, which is exactly what the Landmark Commission wants to see. The repair is durable, but it reads as original.
When a Cracked Pane Is Worth Replacing Instead
If the pane is cracked along the jamb and the sash itself is starting to sag, a pane-only repair may not last. We’ll tell you honestly what we see. Our repair carries a written guarantee anyway. When the second visit is free if the repair fails, that’s not a guess; it’s a promise we’re underwriting every time.
Trusted Brands We Service in Lakewood
We install and service window and door lines from eight professional-grade brands, and for Lakewood homes we lean heavily on three: PGT for impact-rated units that hold up to the hailstorms and summer sun, Therma-Tru for entry doors that need to look right on a 1930s brick cottage, and ES Windows for high-end architectural glazing on remodeled mid-century properties. We stock common hardware and glazing for these lines locally, so a Lakewood customer isn’t waiting two weeks for a hinge clip or an operator arm from halfway across the country. Having product depth means we match the right window to the house, not the other way around.
Common Window Replacement Problems We See in Lakewood Homes
- Rusted steel casement frames and broken operators. Original steel casements from the 1930s and 1940s are everywhere in Lakewood, and after 80 years of Texas humidity, many operators are stripped and the frames are rusted through at the corners. We custom-size replacements to the original masonry opening so the exterior line doesn’t change.
- Stock pocket inserts in out-of-square masonry openings. A 1920s brick opening is rarely square. When a stock insert is crammed in anyway, the sash binds, the operator strips, and you’re replacing the window again inside a season. We measure the actual opening, not a guessed size.
- Bad wiring or rotted studs found once the wall is open. On older Lakewood homes, pulling a window can reveal knob-and-tube wiring or wood rot around the old jamb. That triggers a code-required electrical or framing fix. We write an allowance for this into our quote and send you a photo and a price before we do any extra work.
- Replacement double-hungs that don’t match the original muntin pattern. Swapping a steel casement for a vinyl double-hung changes the look of the whole front elevation. In conservation district homes, that can get pulled by the Landmark Commission. We match the original sight lines, including custom muntin patterns, on every Lakewood replacement that goes through review.
Pricing for Window Replacement in Lakewood, TX
For a typical Lakewood home, full-frame window replacement runs $850 – $2,400 per opening. Insert replacements, where the new window fits into the existing frame, run $500 – $1,400 per opening. Custom work, the kind a 1930s conservation district house usually needs, lands on the higher end: $1,800 – $2,400 per window for steel-to-impact-rated casement conversions. Glass repair sits between $150 and $700 depending on pane type and size, and window maintenance and tune-ups run $95 – $250 per window. The size of the opening, the material (vinyl, wood, aluminum, steel, fiberglass), the glass package, and whether we’re dealing with a conservation district approval all move the number. What won’t happen is a surprise: your written price is in your hands before any work starts, every time, on every job. Call (361) 203-9040 for a free estimate, and we’ll send Spencer’s team to measure and price the job in writing.
We Also Serve Cities Near Lakewood
Though this page is written for Window Replacement in Lakewood, our crews also work in Dallas, Plano, Richardson, and Far North Dallas. Scheduling is coordinated from our Dallas-Fort Worth office, and crews dispatch to those areas on the same routes. The same written-price policy and 365-Day Done Right Promise apply no matter which side of the city line you’re on.
On a 1930s brick cottage near the 6300 block of Lakewood Boulevard, we pulled a rusted original steel casement with a broken operator and a failed jamb. We sized a custom PGT impact-rated casement with a laminated glass interlayer to fit the existing masonry opening exactly, worked through the conservation district’s approval with our permit package, and set the new jamb in waterproofing before reinstalling trim so the exterior line stayed unchanged. That’s the Lakewood job we know how to do, and it’s the reason we write the full plan into your quote before the first tool comes out.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Lakewood
Yes, for homes in the Lakewood East conservation district, exterior window changes on pre-1950 brick and stone homes require Landmark Commission review, and the city permit is separate from that approval. We pull both, and we package the application with drawings that match your existing masonry opening and sight lines, so the review moves faster than if you tried to file it yourself. Call (361) 203-9040 and we’ll tell you what step applies to your street.
Sometimes. If the steel frame is structurally sound and square, we can replace the operator arms, hinges, and hardware and keep the original frame in place. But when the rust has eaten through the jamb or the frame is no longer square, a full custom casement replacement is the only option that won’t bind again within a year. We’ll show you the frame condition and give you a written price before you decide.
Yes. Impact-rated windows from PGT and CGI use laminated glass with a low-E coating that blocks solar heat while letting light through, and in a Lakewood summer that means the AC isn’t fighting the windows. We’ve had homeowners near Williamson Road see their west-facing rooms stop the 4pm heat spike after a full replacement. The exact savings depend on the rest of the house, but the windows will no longer be the weak point in the envelope. Call (361) 203-9040 and we’ll talk through the glass packages.
We stop, take photos, send them to you with a written price for the correction, and we don’t proceed until you approve it. On 1920s and 1930s Lakewood homes, opening a window often reveals knob-and-tube wiring or wood rot around the old jamb, and code requires us to correct those before we set the new window. We write an allowance into your contract for exactly that scenario, so the number doesn’t surprise you mid-job. It’s one of the reasons our quotes for older Lakewood homes are detailed line by line.
We size the new sash to the original masonry opening and we match the muntin profile, the number of lights, and the exterior trim profile. In conservation district homes, we submit those details with the permit packet so the Landmark Commission sees the visual match before we build anything. On a 1930s cottage, a double-hung with a 6-over-6 muntin pattern in a wood or wood-clad sash reads as original. A vinyl 2-over-2 would not, and we’ll tell you that before you spend a dollar. Call (361) 203-9040 to schedule a free estimate, and you’ll get the written plan before anyone picks up a tool.
Written by Spencer Odell, Owner at Hale Windows Dallas, serving Lakewood with written-price window replacement and the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Hale Windows Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.